The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Poly(dimethylsiloxane) Oil Absorbent with a Three-Dimensionally Interconnected Porous Structure and Swellable Skeleton
Abstract
Cleanup of oil spills is a worldwide challenge to prevent serious environmental pollution. A new kind of poly(dimethylsiloxane) (PDMS) oil absorbent with high absorption capacity and excellent reusability was prepared and used for oil/water separation. The preparation process of PDMS oil absorbents involves direct curing of a PDMS prepolymer in a p-xylene solution in the presence of commercial sugar particles, which is simple and economic. PDMS oil absorbents have interconnected pores and a swellable skeleton, combining the advantages of porous materials and gels. Absorption capacities of PDMS oil absorbents are 4-34 g/g for various oils and organic solvents, which are 3 times that reported previously. Owing to their hydrophobicity and oleophilicity, the as-obtained PDMS oil absorbents can selectively collect oils or organic solvents from water. The absorption process can be finished within tens of seconds. Furthermore, the absorbed oils or organic solvents can be recovered by compressing the oil absorbents, and after 20 absorbing/recovering cycles, PDMS oil absorbents show little loss of their absorption capacities and own weights.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Guan, H., Cheng, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b05763 · Cited by 666
Wang, N.-N., Wang, H., Wang, Y.-Y., Wei, Y.-H., Si, J.-Y., Yuen, A. C. Y., Xie, J.-S., Yu, B., Zhu, S.-E., Lu, H.-D., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14265 · Cited by 336
Metadata
- Authors
- Zhang, A., Chen, M., Du, C., Guo, H., Bai, H., & Li, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-11
- Volume
- 5
- Issue
- 20
- Pages
- 10201-10206
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2331344874
- Cited by
- 231
- References
- 1
- FWCI
- 6.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
