The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lightweight, Multifunctional Polyetherimide/Graphene@Fe3O4Composite Foams for Shielding of Electromagnetic Pollution
Abstract
Novel high-performance polyetherimide (PEI)/graphene@Fe3O4 (G@Fe3O4) composite foams with flexible character and low density of about 0.28-0.4 g/cm(3) have been developed by using a phase separation method. The obtained PEI/G@Fe3O4 foam with G@Fe3O4 loading of 10 wt % exhibited excellent specific EMI shielding effectiveness (EMI SE) of ~41.5 dB/(g/cm(3)) at 8-12 GHz. Moreover, most the applied microwave was verified to be absorbed rather than being reflected back, resulting from the improved impedance matching, electromagnetic wave attenuation, as well as multiple reflections. Meanwhile, the resulting foams also possessed a superparamagnetic behavior and low thermal conductiviy of 0.042-0.071 W/(m K). This technique is fast, highly reproducible, and scalable, which may facilitate the commercialization of such composite foams and generalize the use of them as EMI shielding materials in the fields of spacecraft and aircraft.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanocrystal Growth on Graphene with Various Degrees of Oxidation
Wang, H., Robinson, J. T., Diankov, G., & Dai, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100329d · Cited by 530
Cited by
Yang, W., Zhao, Z., Wu, K., Huang, R., Liu, T., Jiang, H., Chen, F., & Fu, Q. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00400a · Cited by 363
Ameli, A., Nofar, M., Wang, S., & Park, C. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500445g · Cited by 339
Metadata
- Authors
- Shen, B., Zhai, W., Tao, M., Ling, J., & Zheng, W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-30
- Volume
- 5
- Issue
- 21
- Pages
- 11383-11391
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2088470292
- Cited by
- 629
- References
- 1
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
