The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Influence of g-C3N4Nanosheets on Thermal Stability and Mechanical Properties of Biopolymer Electrolyte Nanocomposite Films: A Novel Investigation
Abstract
A series of sodium alginate (SA) nanocomposite films with different loading levels of graphitic-like carbon nitride (g-C3N4) were fabricated via the casting technique. The structure and morphology of nanocomposite films were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis results suggested that thermal stability of all the nanocomposite films was enhanced significantly, including initial thermal degradation temperature increased by 29.1 °C and half thermal degradation temperature improved by 118.2 °C. Mechanical properties characterized by tensile testing and dynamic mechanical analysis measurements were also reinforced remarkably. With addition of 6.0 wt % g-C3N4, the tensile strength of SA nanocomposite films was dramatically enhanced by 103%, while the Young's modulus remarkably increased from 60 to 3540 MPa. Moreover, the storage modulus significantly improved by 34.5% was observed at loadings as low as 2.0 wt %. These enhancements were further investigated by means of differential scanning calorimetry and real time Fourier transform infrared spectra. A new perspective of balance was proposed to explain the improvement of those properties for the first time. At lower than 1.0 wt % loading, most of the g-C3N4 nanosheets were discrete in the SA matrix, resulting in improved thermal stability and mechanical properties; above 1.0 wt % and below 6.0 wt % content, the aggregation was present in SA host coupled with insufficient hydrogen bondings limiting the barrier for heat and leading to the earlier degradation and poor dispersion; at 6.0 wt % addition, the favorable balance was established with enhanced thermal and mechanical performances. However, the balance point of 2.0 wt % from dynamic mechanical analysis was due to combination of temperature and agglomeration. The work may contribute to a potential research approach for other nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wong, T. Y., Preston, L. A., & Schiller, N. L. (2000) · Annual Review of Microbiology · doi:10.1146/annurev.micro.54.1.289 · Cited by 669
Di Noto, V., Negro, E., Polizzi, S., Riello, P., & Atanassov, P. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.09.034 · Cited by 65
Cited by
Graphitic carbon nitride “reloaded”: emerging applications beyond (photo)catalysis
Liu, J., Wang, H., & Antonietti, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00767d · Cited by 930
Liang, Q., Li, Z., Yu, X., Huang, Z., Kang, F., & Yang, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502057 · Cited by 646
Carbon-family materials for flame retardant polymeric materials
Wang, X., Kalali, E. N., Wan, J.-T., & Wang, D.-Y. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.001 · Cited by 569
Tong, Z., Yang, D., Xiao, T., Tian, Y., & Jiang, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.072 · Cited by 438
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Metadata
- Authors
- Shi, Y., Jiang, S., Zhou, K., Bao, C., Yu, B., Qian, X., Wang, B., Hong, N., Wen, P., Gui, Z., Hu, Y., & Yuen, R. K. K.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-12
- Volume
- 6
- Issue
- 1
- Pages
- 429-437
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2314412442
- Cited by
- 192
- References
- 2
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of g-C3N4Nanosheets on Thermal Stability and Mechanical Properties of Biopolymer Electrolyte Nanocomposite Films: A Novel Investigation. https://app.cochat.ai/papers/10.1021/am4044932
- The paper
- Shi, Y., Jiang, S., Zhou, K., Bao, C., Yu, B., Qian, X., Wang, B., Hong, N., Wen, P., Gui, Z., Hu, Y., & Yuen, R. K. K. (2014). Influence of g-C3N4Nanosheets on Thermal Stability and Mechanical Properties of Biopolymer Electrolyte Nanocomposite Films: A Novel Investigation. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am4044932
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.