The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Li Storage and Impedance Spectroscopy Studies on Co3O4, CoO, and CoN for Li-Ion Batteries
Abstract
The compounds, CoN, CoO, and Co3O4 were prepared in the form of nano-rod/particles and we investigated the Li-cycling properties, and their use as an anode material. The urea combustion method, nitridation, and carbothermal reduction methods were adopted to prepare Co3O4, CoN, and CoO, respectively. X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and the Brunauer-Emmett-Teller (BET) surface and density methods were used to characterise the materials. Cyclic voltammetry (CV) was performed and galvanostatic cycling tests were also conducted up to 60-70 cycles. The observed reversible capacity of all compounds is of the increasing order CoO, Co3O4, CoN and all compounds showed negligible capacity fading. CoO allows for Li2O and Co metal to form during the discharge cycle, allowing for a high theoretical capacity of 715 mA h g(-1). Co3O4 allows for 4 Li2O and 3Co to form, and has a theoretical capacity of 890 mAhg(-1). CoN is the best anode material of the three because the nitrogen allows for Li3N and Co to form, resulting in an even higher theoretical capacity of 1100 mAhg(-1) due to the Li3N and Co metal formation. Irrespective of morphology the charge profiles of all three compounds showed a major plateaux ~2.0 V vs. Li and potential values are almost unchanged irrespective of crystal structure. Electrochemical impedance spectroscopy (EIS) was performed to understand variation resistance and capacitance values.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent developments in lithium ion batteries
Wakihara, M. (2001) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(01)00030-4 · Cited by 719
Cited by
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Balogun, M.-S., Huang, Y., Qiu, W., Yang, H., Ji, H., & Tong, Y. (2017) · Materials Today · doi:10.1016/j.mattod.2017.03.019 · Cited by 432
Wang, F., Wang, B., Li, J., Wang, B., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c10664 · Cited by 357
Yu, M., Waag, F., Chan, C. K., Weidenthaler, C., Barcikowski, S., & Tüysüz, H. (2020) · ChemSusChem · doi:10.1002/cssc.201903186 · Cited by 93
Flower-like porous cobalt(II) monoxide nanostructures as anode material for Li-ion batteries
Jena, A., Penki, T. R., Munichandraiah, N., & Shivashankar, S. A. (2016) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2015.11.003 · Cited by 73
Metadata
- Authors
- Reddy, M. V., Prithvi, G., Loh, K. P., & Chowdari, B. V. R.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-26
- Volume
- 6
- Issue
- 1
- Pages
- 680-690
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2331278850
- Cited by
- 220
- References
- 1
- FWCI
- 14.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Li Storage and Impedance Spectroscopy Studies on Co3O4, CoO, and CoN for Li-Ion Batteries. https://app.cochat.ai/papers/10.1021/am4047552
- The paper
- Reddy, M. V., Prithvi, G., Loh, K. P., & Chowdari, B. V. R. (2014). Li Storage and Impedance Spectroscopy Studies on Co3O4, CoO, and CoN for Li-Ion Batteries. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am4047552
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.