The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Effect of Cellulose Nanocrystals (CNC) Particle Morphology on Dispersion and Rheological and Mechanical Properties of Polypropylene/CNC Nanocomposites
Abstract
Polypropylene (PP) nanocomposites containing spray-dried cellulose nanocrystals (CNC), freeze-dried CNC, and spray-freeze-dried CNC (CNCSFD) were prepared via melt mixing in an internal batch mixer. Polarized light, scanning electron, and atomic force microscopy showed significantly better dispersion of CNCSFD in PP/CNC nanocomposites compared with the spray-dried and freeze-dried CNCs. Rheological measurements, including linear and nonlinear viscoelastic tests, were performed on PP/CNC samples. The microscopy results were supported by small-amplitude oscillatory shear tests, which showed substantial rises in the magnitudes of key rheological parameters of PP samples containing CNCSFD. Steady-shear results revealed a strong shear thinning behavior of PP samples containing CNCSFD. Moreover, PP melts containing CNCSFD exhibited a yield stress. The magnitude of the yield stress and the degree of shear thinning behavior increased with CNCSFD concentration. It was found that CNCSFD agglomerates with a weblike structure were more effective in modifying the rheological properties. This effect was attributed to better dispersion of the agglomerates with the weblike structure. Dynamic mechanical analysis showed considerable improvement in the modulus of samples containing CNCSFD agglomerates. The percolation mechanical model with modified volume percolation threshold and filler network strength values and the Halpin-Kardos model were used to fit the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Araki, J., Wada, M., Kuga, S., & Okano, T. (1998) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00404-x · Cited by 769
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Cellulose nanocrystals reinforced poly(oxyethylene)
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., & Dufresne, A. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.094 · Cited by 398
Ljungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé (2005) · Biomacromolecules · doi:10.1021/bm050222v · Cited by 395
Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
Takayanagi, M., Uemura, S., & Minami, S. (1964) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070050111 · Cited by 323
Polysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials
Dubief, D., Samain, E., & Dufresne, A. (1999) · Macromolecules · doi:10.1021/ma990274a · Cited by 259
Khoshkava, V., & Kamal, M. R. (2013) · Biomacromolecules · doi:10.1021/bm400784j · Cited by 235
Self-citationDufresne, A., Cavaillé, J., & Helbert, W. (1997) · Polymer Composites · doi:10.1002/pc.10274 · Cited by 189
Cited by
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications
Li, M., Wu, Q., Moon, R. J., Hubbe, M. A., & Bortner, M. J. (2021) · Advanced Materials · doi:10.1002/adma.202006052 · Cited by 324
Recent trends and applications of cellulose nanocrystals in food industry
Mu, R., Hong, X., Ni, Y., Li, Y., Pang, J., Wang, Q., Xiao, J., & Zheng, Y. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.09.013 · Cited by 322
Kamal, M. R., & Khoshkava, V. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.012 · Cited by 298
Self-citation3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Metadata
- Authors
- Khoshkava, V., & Kamal, M. R.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-06-02
- Volume
- 6
- Issue
- 11
- Pages
- 8146-8157
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2333458078
- Cited by
- 171
- References
- 9
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Cellulose Nanocrystals (CNC) Particle Morphology on Dispersion and Rheological and Mechanical Properties of Polypropylene/CNC Nanocomposites. https://app.cochat.ai/papers/10.1021/am500577e
- The paper
- Khoshkava, V., & Kamal, M. R. (2014). Effect of Cellulose Nanocrystals (CNC) Particle Morphology on Dispersion and Rheological and Mechanical Properties of Polypropylene/CNC Nanocomposites. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am500577e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.