The DOI matches its Crossref record.
Highly Stable CO2/N2 and CO2/CH4 Selectivity in Hyper-Cross-Linked Heterocyclic Porous Polymers
Abstract
The largest obstacles for landfill/flue gas separation using microporous materials are small adsorption values and low selectivity ratios. This study demonstrates that these adsorption and selectivity challenges can be overcome by utilizing a series of hyper-cross-linked heterocyclic polymer networks. These microporous organic polymers (MOPs) were synthesized in a single step by inexpensive Friedel-Crafts-catalyzed reactions using dimethoxymethane as an external linker. The amorphous networks show moderate Brunauer-Emmett-Teller surface areas up to 1022 m(2) g(-1), a narrow pore size distribution in the range from 6 to 8 Å, and high physicochemical stability. Owing to the presence of the heteroatomic pore surfaces in the networks, they exhibit maximum storage capacities for CO2 of 11.4 wt % at 273 K and 1 atm. Additionally, remarkable selectivity ratios for CO2 adsorption over N2 (100) and CH4 (15) at 273 K were obtained. More importantly, as compared with any other porous materials, much higher selectivity for CO2/N2 (80) and CO2/CH4 (15) was observed at 298 K, showing that these selectivity ratios remain high at elevated temperature. The very high CO2/N2 selectivity values are ascribed to the binding affinity of abundantly available electron-rich basic heteroatoms, high CO2 isoteric heats of adsorption (49-38 kJ mol(-1)), and the predominantly microporous nature of the MOPs. Binding energies calculated using the high level of ab initio theory showed that the selectivity is indeed attributed to the heteroatom-CO2 interactions. By employing an easy and economical synthesis procedure these MOPs with high thermochemical stability are believed to be a promising candidate for selective CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Tan, L., & Tan, B. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00851h · Cited by 1,357
Li, J., Jia, D., Guo, Z., Liu, Y., Lyu, Y., Zhou, Y., & Wang, J. (2017) · Green Chemistry · doi:10.1039/c7gc00105c · Cited by 314
Hypercrosslinked Polymers: A Review
Huang, J., & Turner, S. R. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1344703 · Cited by 313
Carbon dioxide capture in amorphous porous organic polymers
Wang, W., Zhou, M., & Yuan, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09234a · Cited by 307
Du, T., Fang, X., Liu, L., Shang, J., Zhang, B., Wei, Y., Gong, H., Rahman, S., May, E. F., Webley, P. A., et al. (2018) · Chemical Communications · doi:10.1039/c8cc00634b · Cited by 60
Metadata
- Authors
- Saleh, M., Lee, H. M., Kemp, K. C., & Kim, K. S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-13
- Volume
- 6
- Issue
- 10
- Pages
- 7325-7333
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2319194646
- Cited by
- 173
- References
- 0
- FWCI
- 9.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.