The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Interconnected Network of MnO2 Nanowires with a “Cocoonlike” Morphology: Redox Couple-Mediated Performance Enhancement in Symmetric Aqueous Supercapacitor
Abstract
Low electronic conductivity and slow faradic processes limit the performance of MnO2 as an electrochemical pseudocapacitor with respect to cycling and power density. Herein, we report preparation of single-phase α-MnO2, composed of an interconnected nanowire network with "cocoonlike" morphology, and its application as electrode in a symmetric aqueous supercapacitor. Increased "effective" surface area, coexistence of micropores and mesopores, and enhanced electron transport in these nanowire networks result in a specific pseudocapacitance (CS) of 775 F·g(-1) in 3 M KOH, derived from cyclic voltammetry in the potential window of -1 to +1 V at a scan rate of 2 mV·s(-1), the highest reported for two-electrode symmetric configuration. Furthermore, introduction of K4Fe(CN)6 as a redox-active additive to KOH results in ∼7 times increase in energy density at a power density of ∼6000 W·kg(-1). The presence of the Fe(CN)6(4-)/Fe(CN)6(3-) redox couple provides an electron buffer source compensating for the slow faradic reactions. The results demonstrate that this simple approach might be an effective way to enhance the redox kinetics and reversibility of transition metal oxide-based pseudocapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, Q., Lu, X.-F., Xu, H., Tong, Y.-X., & Li, G.-R. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405271q · Cited by 107
Cited by
A review of electrolyte materials and compositions for electrochemical supercapacitors
Zhong, C., Deng, Y., Hu, W., Qiao, J., Zhang, L., & Zhang, J. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00303b · Cited by 3,687
Gel Polymer Electrolytes for Electrochemical Energy Storage
Cheng, X., Pan, J., Zhao, Y., Liao, M., & Peng, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702184 · Cited by 1,020
Sundriyal, S., Kaur, H., Bhardwaj, S. K., Mishra, S., Kim, K.-H., & Deep, A. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.04.018 · Cited by 383
Recent progress on transition metal oxides as advanced materials for energy conversion and storage
Yuan, S., Duan, X., Liu, J., Ye, Y., Lv, F., Liu, T., Wang, Q., & Zhang, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.007 · Cited by 329
Jiao, Y., Pei, J., Yan, C., Chen, D., Hu, Y., & Chen, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05384j · Cited by 292
Metadata
- Authors
- Maiti, S., Pramanik, A., & Mahanty, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-06-26
- Volume
- 6
- Issue
- 13
- Pages
- 10754-10762
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2025091586
- Cited by
- 174
- References
- 1
- FWCI
- 6.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.