The DOI matches its Crossref record.
Gelatin Particle-Stabilized High Internal Phase Emulsions as Nutraceutical Containers
Abstract
In this paper, we report for the first time the use of a well-dispersed gelatin particle as a representative of natural and biocompatible materials to be an effective particle stabilizer for high internal phase emulsion (HIPE) formulation. Fairly monodispersed gelatin particles (∼200 nm) were synthesized through a two-step desolvation method and characterized by dynamic light scattering, ζ-potential measurements, scanning electron microscopy, and atomic force microscopy. Those protein latexes were then used as sole emulsifiers to fabricate stable oil-in-water Pickering HIPEs at different concentrations, pH conditions, and homogenization times. Most of the gelatin particles were irreversibly adsorbed at the oil-water interface to hinder droplet coalescence, such that Pickering HIPEs can be formed by a small amount of gelatin particles (as low as 0.5 wt % in the water phase) at pH far away from the isoelectric point of the gelatin particles. In addition, increasing homogenization time led to narrow size distribution of droplets, and high particle concentration resulted in more solidlike Pickering HIPEs. In vitro controlled-release experiments revealed that the release of the encapsulated β-carotene can be tuned by manipulating the concentration of gelatin particles in the formulation, suggesting that the stable and narrow-size-distributed gelatin-stabilized HIPEs had potential in functional food and pharmaceutical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pickering emulsions: Versatility of colloidal particles and recent applications
Jiang, H., Sheng, Y., & Ngai, T. (2020) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2020.04.010 · Cited by 483
Self-citationBiopolymer-based particles as stabilizing agents for emulsions and foams
Dickinson, E. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2016.06.024 · Cited by 467
Food-grade particles for emulsion stabilization
Tavernier, I., Wijaya, W., Van der Meeren, P., Dewettinck, K., & Patel, A. R. (2016) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2016.01.023 · Cited by 385
Zeng, T., Wu, Z.-L., Zhu, J.-Y., Yin, S.-W., Tang, C.-H., Wu, L.-Y., & Yang, X.-Q. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.03.116 · Cited by 320
A review of recent progress on high internal-phase Pickering emulsions in food science
Abdullah, Weiss, J., Ahmad, T., Zhang, C., & Zhang, H. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.10.016 · Cited by 318
Stability, rheology, and β-carotene bioaccessibility of high internal phase emulsion gels
Liu, W., Gao, H., McClements, D. J., Zhou, L., Wu, J., & Zou, L. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.10.012 · Cited by 311
Sun, C., Fu, J.-J., Tan, Z.-F., Zhang, G.-Y., Xu, X.-B., & Song, L. (2022) · LWT · doi:10.1016/j.lwt.2022.113465 · Cited by 84
Metadata
- Authors
- Tan, H., Sun, G., Lin, W., Mu, C., & Ngai, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-08-18
- Volume
- 6
- Issue
- 16
- Pages
- 13977-13984
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2316656522
- Cited by
- 276
- References
- 0
- FWCI
- 13.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.