The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electrospun Superhydrophobic Membranes with Unique Structures for Membrane Distillation
Abstract
With modest temperature demand, low operating pressure, and high solute rejection, membrane distillation (MD) is an attractive option for desalination, waste treatment, and food and pharmaceutical processing. However, large-scale practical applications of MD are still hindered by the absence of effective membranes with high hydrophobicity, high porosity, and adequate mechanical strength, which are important properties for MD permeation fluxes, stable long-term performance, and effective packing in modules without damage. This study describes novel design strategies for highly robust superhydrophobic dual-layer membranes for MD via electrospinning. One of the newly developed membranes comprises a durable and ultrathin 3-dimensional (3D) superhydrophobic skin and porous nanofibrous support whereas another was fabricated by electrospinning 3D superhydrophobic layers on a nonwoven support. These membranes exhibit superhydrophobicity toward distilled water, salty water, oil-in-water emulsion, and beverages, which enables them to be used not only for desalination but also for other processes. The superhydrophobic dual-layer membrane #3S-N with nanofibrous support has a competitive permeation flux of 24.6 ± 1.2 kg m(-2) h(-1) in MD (feed and permeate temperate were set as 333 and 293 K, respectively) due to the higher porosity of the nanofibrous scaffold. Meanwhile, the membranes with the nonwoven support exhibit greater mechanical strength due to this support combined with better long-term performance because of the thicker 3D superhydrophobic layers. The morphology, pore size, porosity, mechanical properties, and liquid enter pressure of water of these superhydrophobic composite membranes with two different structures are reported and compared with commercial polyvinylidene fluoride membranes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
Roles of silanes and silicones in forming superhydrophobic and superoleophobic materials
Li, L., Li, B., Dong, J., & Zhang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05441b · Cited by 306
Novel Janus Membrane for Membrane Distillation with Simultaneous Fouling and Wetting Resistance
Huang, Y.-X., Wang, Z., Jin, J., & Lin, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02848 · Cited by 295
Electrospun nanofiber membranes
Wang, X., & Hsiao, B. S. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.03.001 · Cited by 288
A review of membrane wettability for the treatment of saline water deploying membrane distillation
Yao, M., Tijing, L. D., Naidu, G., Kim, S.-H., Matsuyama, H., Fane, A. G., & Shon, H. K. (2020) · Desalination · doi:10.1016/j.desal.2020.114312 · Cited by 282
Self-citation
Metadata
- Authors
- Liao, Y., Loh, C.-H., Wang, R., & Fane, A. G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-09-05
- Volume
- 6
- Issue
- 18
- Pages
- 16035-16048
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2313624557
- Cited by
- 254
- References
- 1
- FWCI
- 14.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrospun Superhydrophobic Membranes with Unique Structures for Membrane Distillation. https://app.cochat.ai/papers/10.1021/am503968n
- The paper
- Liao, Y., Loh, C.-H., Wang, R., & Fane, A. G. (2014). Electrospun Superhydrophobic Membranes with Unique Structures for Membrane Distillation. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am503968n
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.