The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Development of Sol–Gel Icephobic Coatings: Effect of Surface Roughness and Surface Energy
Open accessAbstract
Sol-gel coatings with different roughness and surface energy were prepared on glass substrates. Methyl triethoxysilane (MTEOS), 3-Glycidyloxypropyl trimethoxysilane (GLYMO) and fluoroalkylsilane (FAS) were used to obtain a mechanically robust icephobic coating. Different amount of hydrophobic silica nano particles was added as fillers to introduce different roughness and surface energy to the coatings. The microstructure, roughness, and surface energy, together with elemental information and surface chemical state, were investigated at room temperature. The contact angle and sliding angle were measured at different temperatures to correlate the wetting behavior at low temperature with the anti-icing performance. The ice adhesion shear strength was measured inside an ice chamber using a self-designed tester. The factors influencing the ice adhesion were discussed, and the optimum anti-icing performance found in the series of coatings. It was found that lower surface energy leads to lower ice adhesion regardless of the roughness, while the roughness plays a more complicated role. The wetting behavior of the droplet on surface changes as temperature decreases. The anti-icing performance is closely related to the antiwetting property of the surfaces at subzero temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Icephobic materials: Fundamentals, performance evaluation, and applications
Shen, Y., Wu, X., Tao, J., Zhu, C., Lai, Y., & Chen, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.004 · Cited by 441
Self-citationPan, R., Zhang, H., & Zhong, M. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c16259 · Cited by 342
Recent Advances in TiO2‐Based Nanostructured Surfaces with Controllable Wettability and Adhesion
Lai, Y., Huang, J., Cui, Z., Ge, M., Zhang, K., Chen, Z., & Chi, L. (2016) · Small · doi:10.1002/smll.201501837 · Cited by 329
Self-citationZhang, S., Huang, J., Cheng, Y., Yang, H., Chen, Z., & Lai, Y. (2017) · Small · doi:10.1002/smll.201701867 · Cited by 328
Self-citationZheng, S., Li, C., Fu, Q., Hu, W., Xiang, T., Wang, Q., Du, M., Liu, X., & Chen, Z. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.155 · Cited by 305
Self-citationCondensation frosting and passive anti-frosting
Yang, S., Wu, C., Zhao, G., Sun, J., Yao, X., Ma, X., & Wang, Z. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100474 · Cited by 92
Metadata
- Authors
- Fu, Q., Wu, X., Kumar, D., Ho, J. W. C., Kanhere, P. D., Srikanth, N., Liu, E., Wilson, P., & Chen, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-11-19
- Volume
- 6
- Issue
- 23
- Pages
- 20685-20692
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1995837822
- Cited by
- 182
- References
- 1
- FWCI
- 19.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.