The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Proton-Insertion-Enhanced Pseudocapacitance Based on the Assembly Structure of Tungsten Oxide
Abstract
The capacitances of supercapacitors with carbon and metal oxides as electrodes are usually associated with the available surface areas of the electrode materials. However, in this paper, we report that proton insertion, an unusual capacitive mechanism, may effectively enhance the capacitance of metal oxides with low surface area but specific structures. Tungsten trioxide (WO3) as the electrode material for supercapacitors has always suffered from low capacitance. Nevertheless, enhanced by the proton insertion mechanism, we demonstrate that electrodes fabricated by an assembly structure of hexagonal-phase WO3 (h-WO3) nanopillars achieve a high capacitance of up to 421.8 F g(-1) under the current density of 0.5 A g(-1), which is the highest capacitance achieved with pure WO3 as the electrodes so far, to the best of our knowledge. Detailed analyses indicate that proton insertion dominates the electrochemical behavior of h-WO3 and plays the key role in reaching high capacitance by excluding other mechanisms. In addition, a thorough investigation on the temperature-dependent electrochemical performance reveals excellent performance stability at different temperatures. This study provides a new approach to achieving high capacitance by effective proton insertion into ordered tunnels in crystallized metal oxides, which is primarily important for the fabrication of compact high-performance energy storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured Tungsten Oxide – Properties, Synthesis, and Applications
Zheng, H., Ou, J. Z., Strano, M. S., Kaner, R. B., Mitchell, A., & Kalantar‐zadeh, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002477 · Cited by 1,479
Cited by
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
A self-healable and highly stretchable supercapacitor based on a dual crosslinked polyelectrolyte
Huang, Y., Zhong, M., Huang, Y., Zhu, M., Pei, Z., Wang, Z., Xue, Q., Xie, X., & Zhi, C. (2015) · Nature Communications · doi:10.1038/ncomms10310 · Cited by 742
Self-citationZhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600969 · Cited by 731
Self-citationSun, J., Wu, C., Sun, X., Hu, H., Zhi, C., Hou, L., & Yuan, C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00932a · Cited by 361
Self-citationHuang, Y., Li, Z., Pei, Z., Liu, Z., Li, H., Zhu, M., Fan, J., Dai, Q., Zhang, M., Dai, L., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802288 · Cited by 319
Self-citation
Metadata
- Authors
- Zhu, M., Meng, W., Huang, Y., Huang, Y., & Zhi, C.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-14
- Volume
- 6
- Issue
- 21
- Pages
- 18901-18910
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2060222139
- Cited by
- 206
- References
- 1
- FWCI
- 6.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.