The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
One-Step Electrodeposition Process To Fabricate Corrosion-Resistant Superhydrophobic Surface on Magnesium Alloy
Abstract
A simple, one-step method has been developed to construct a superhydrophobic surface by electrodepositing Mg-Mn-Ce magnesium plate in an ethanol solution containing cerium nitrate hexahydrate and myristic acid. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were employed to characterize the surfaces. The shortest electrodeposition time to obtain a superhydrophobic surface was about 1 min, and the as-prepared superhydrophobic surfaces had a maximum contact angle of 159.8° and a sliding angle of less than 2°. Potentiodynamic polarization and electrochemical impedance spectroscopy measurements demonstrated that the superhydrophobic surface greatly improved the corrosion properties of magnesium alloy in 3.5 wt % aqueous solutions of NaCl, Na2SO4, NaClO3, and NaNO3. Besides, the chemical stability and mechanical durability of the as-prepared superhydrophobic surface were also examined. The presented method is rapid, low-cost, and environmentally friendly and thus should be of significant value for the industrial fabrication of anticorrosive superhydrophobic surfaces and should have a promising future in expanding the applications of magnesium alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
Robust superhydrophobicity: mechanisms and strategies
Zhang, W., Wang, D., Sun, Z., Song, J., & Deng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00751j · Cited by 686
Qian, H., Xu, D., Du, C., Zhang, D., Li, X., Huang, L., Deng, L., Tu, Y., Mol, J. M. C., & Terryn, H. A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10903a · Cited by 522
Bioinspired Designs of Superhydrophobic and Superhydrophilic Materials
Si, Y., Dong, Z., & Jiang, L. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00504 · Cited by 507
Barati Darband, G., Aliofkhazraei, M., Khorsand, S., Sokhanvar, S., & Kaboli, A. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.01.013 · Cited by 482
Icephobic materials: Fundamentals, performance evaluation, and applications
Shen, Y., Wu, X., Tao, J., Zhu, C., Lai, Y., & Chen, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.004 · Cited by 441
Metadata
- Authors
- Liu, Q., Chen, D., & Kang, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-01-15
- Volume
- 7
- Issue
- 3
- Pages
- 1859-1867
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2327686356
- Cited by
- 405
- References
- 1
- FWCI
- 15.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
