The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Electrically Conductive Polypropylene Nanocomposites with Negative Permittivity at Low Carbon Nanotube Loading Levels
Abstract
Polypropylene (PP)/carbon nanotubes (CNTs) nanocomposites were prepared by coating CNTs on the surface of gelated/swollen soft PP pellets. The electrical conductivity (σ) studies revealed a percolation threshold of only 0.3 wt %, and the electrical conductivity mechanism followed a 3-d variable range hopping (VRH) behavior. At lower processing temperature, the CNTs formed the network structure more easily, resulting in a higher σ. The fraction of γ-phase PP increased with increasing the pressing temperature. The CNTs at lower loading (0.1 wt %) served as nucleating sites and promoted the crystallization of PP. The CNTs favored the disentanglement of polymer chains and thus caused an even lower melt viscosity of nanocomposites than that of pure PP. The calculated optical band gap of CNTs was observed to increase with increasing the processing temperature, i.e., 1.55 eV for nanocomposites prepared at 120 °C and 1.70 eV prepared at 160 and 180 °C. Both the Drude model and interband transition phenomenon have been used for theoretical analysis of the real permittivity of the nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optical Constants of the Noble Metals
Johnson, P. B., & Christy, R. W. (1972) · Physical Review B · doi:10.1103/physrevb.6.4370 · Cited by 20,094
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Cited by
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
Abbasi, H., Antunes, M., & Velasco, J. I. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.02.003 · Cited by 744
Sun, K., Xie, P., Wang, Z., Su, T., Shao, Q., Ryu, J., Zhang, X., Guo, J., Shankar, A., Li, J., et al. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.083 · Cited by 426
Self-citationJana, J., Ganguly, M., & Pal, T. (2016) · RSC Advances · doi:10.1039/c6ra14173k · Cited by 357
A review of the interfacial characteristics of polymer nanocomposites containing carbon nanotubes
Chen, J., Liu, B., Gao, X., & Xu, D. (2018) · RSC Advances · doi:10.1039/c8ra04205e · Cited by 291
Polymer carbon dots from plastics waste upcycling
Aji, M. P., Wati, A. L., Priyanto, A., Karunawan, J., Nuryadin, B. W., Wibowo, E., Marwoto, P., & Sulhadi (2018) · Environmental Nanotechnology, Monitoring & Management · doi:10.1016/j.enmm.2018.01.003 · Cited by 49
Metadata
- Authors
- Zhang, X., Yan, X., He, Q., Wei, H., Long, J., Guo, J., Gu, H., Yu, J., Liu, J., Ding, D., Sun, L., Wei, S., & Guo, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-10
- Volume
- 7
- Issue
- 11
- Pages
- 6125-6138
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2014732622
- Cited by
- 175
- References
- 3
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.