The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Double Metal Ions Synergistic Effect in Hierarchical Multiple Sulfide Microflowers for Enhanced Supercapacitor Performance
Abstract
In this paper, the design, synthesis, and measurement of a new and hierarchically structured series of NixCo1-xS1.097 electroactive materials are reported. The materials were synthesized through an ion-exchange process using hierarchically structured CoS1.097 as precursors, and a strategy utilizing the synergistic effect of double metal ions was developed. Two complementary metal ions were used to enhance the performance of electrode materials. The specific capacitance of the electroactive materials was continuously improved by increasing the nickel ion content, and the electric conductivity was also enhanced when the cobalt ion was varied. Experimental results showed that the nickel ion content in NixCo1-xS1.097 could be adjusted from x = 0 to 0.48. Specifically, when x = 0.48, the composite exhibited a remarkable maximum specific capacitance approximately 5 times higher than that of the CoS1.097 precursors at a current density of 0.5 A g(-1). Furthermore, the specific capacitance of Ni0.48Co0.52S1.097 electrodes that were modified with reduced graphene oxide could reach to 1152 and 971 F g(-1) at current densities of 0.5 and 20 A g(-1) and showed remarkably higher electrochemical performance than the unmodified electrodes because of their enhanced electrical conductivity. Thus, the strategy utilizing the synergistic effect of double metal ions is an alternative technique to fabricate high-performance electrode materials for supercapacitors and lithium ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
Luo, J., Im, J.-H., Mayer, M. T., Schreier, M., Nazeeruddin, M. K., Park, N.-G., Tilley, S. D., Fan, H. J., & Grätzel, M. (2014) · Science · doi:10.1126/science.1258307 · Cited by 2,509
Cited by
Chemical supercapacitors: a review focusing on metallic compounds and conducting polymers
Naskar, P., Maiti, A., Chakraborty, P., Kundu, D., Biswas, B., & Banerjee, A. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09655e · Cited by 303
Metadata
- Authors
- Gao, Y., Mi, L., Wei, W., Cui, S., Zheng, Z., Hou, H., & Chen, W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-10
- Volume
- 7
- Issue
- 7
- Pages
- 4311-4319
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1985502096
- Cited by
- 234
- References
- 1
- FWCI
- 9.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.