The DOI matches its Crossref record.
Photocatalytic Activity for Hydrogen Evolution of Electrospun TiO2 Nanofibers
Abstract
We report herein a simple procedure for the fabrication of TiO2 nanofibers by the combination of electrospinning and sol-gel techniques by using poly(vinylpyrrolidone) (PVP), titanium(IV) butoxide, and acetylacetone in methanol as a spinning solution. TiO2 nanofibers (260-355 nm in diameter), with a bundle of nanofibrils (20-25 nm in diameters) aligned in the fiber direction, or particle-linked structures were obtained from the calcination of as-spun TiO2/PVP composite fibers at temperatures ranging from 300 to 700 degrees C. These nanofibers were utilized as photocatalysts for hydrogen evolution. The nanofiber photocatalyst calcined at 450 degrees C showed the highest activity among the TiO2 nanofibers tested such as ones prepared by the hydrothermal method and anatase nanoparticles (Ishihara ST-01). These results indicate that one-dimensional electrospun nanofibers with highly aligned bundled nanofibrils are beneficial for enhancement of the crystallinity, large surface area, and higher photocatalytic activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
TiO2 photocatalysis: Design and applications
Nakata, K., & Fujishima, A. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.06.001 · Cited by 3,651
Titanium Dioxide-Based Nanomaterials for Photocatalytic Fuel Generations
Ma, Y., Wang, X., Jia, Y., Chen, X., Han, H., & Li, C. (2014) · Chemical Reviews · doi:10.1021/cr500008u · Cited by 2,411
Engineering heterogeneous semiconductors for solar water splitting
Li, X., Yu, J., Low, J., Fang, Y., Xiao, J., & Chen, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04461d · Cited by 1,888
Functional materials by electrospinning of polymers
Agarwal, S., Greiner, A., & Wendorff, J. H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.001 · Cited by 925
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Karthikeyan, C., Arunachalam, P., Ramachandran, K., Al-Mayouf, A. M., & Karuppuchamy, S. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154281 · Cited by 627
TiO2Nanoparticles as Functional Building Blocks
Sang, L., Zhao, Y., & Burda, C. (2014) · Chemical Reviews · doi:10.1021/cr400629p · Cited by 487
Li, B., Lai, C., Zeng, G., Qin, L., Yi, H., Huang, D., Zhou, C., Liu, X., Cheng, M., Xu, P., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06128 · Cited by 483
Photocatalytic production of hydrogen from biomass-derived feedstocks
Puga, A. V. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.12.009 · Cited by 440
Dai, Y., Liu, W., Formo, E., Sun, Y., & Xia, Y. (2011) · Polymers for Advanced Technologies · doi:10.1002/pat.1839 · Cited by 359
Recent development and future prospects of TiO2photocatalysis
Peiris, S., de Silva, H. B., Ranasinghe, K. N., Bandara, S. V., & Perera, I. R. (2021) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.202000465 · Cited by 346
Hierarchical electrospun nanofibers for energy harvesting, production and environmental remediation
Kumar, P. S., Sundaramurthy, J., Sundarrajan, S., Babu, V. J., Singh, G., Allakhverdiev, S. I., & Ramakrishna, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00612g · Cited by 322
Metal nanoparticles in liquid phase catalysis; from recent advances to future goals
Zahmakıran, M., & Özkar, S. (2011) · Nanoscale · doi:10.1039/c1nr10201j · Cited by 299
Cao, T., Li, Y., Wang, C., Shao, C., & Liu, Y. (2011) · Langmuir · doi:10.1021/la104195v · Cited by 290
Metadata
- Authors
- Chuangchote, S., Jitputti, J., Sagawa, T., & Yoshikawa, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-21
- Volume
- 1
- Issue
- 5
- Pages
- 1140-1143
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2090909960
- Cited by
- 242
- References
- 0
- FWCI
- 5.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.