The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
ARGET ATRP for Versatile Grafting of Cellulose Using Various Monomers
Abstract
In recent years, cellulose-based materials have attracted significant attention. To broaden the application areas for cellulose, polymers are often grafted to/from the surface to modify its properties. This study applies ARGET (activators regenerated by electron transfer) ATRP (atom transfer radical polymerization) when straightforwardly grafting methyl methacrylate (MMA), styrene (St), and glycidyl methacrylate (GMA) from cellulose in the form of conventional filter paper in the presence of a sacrificial initiator. The free polymer, formed from the free initiator in parallel to the grafting, was characterized by (1)H NMR and SEC, showing that sufficient control is achieved. However, the analyses also indicated that the propagation from the surface cannot be neglected compared to the propagation of the free polymer at higher targeted molecular weights, which is an assumption often made. The grafted filter papers were evaluated with FT-IR, suggesting that the amount of polymer on the surface increased with increasing monomer conversion, which the FE-SEM micrographs of the substrates also demonstrated. Water contact angle (CA) measurements implied that covering layers of PMMA and PS were formed on the cellulose substrate, making the surface hydrophobic, in spite of low DPs. The CA of the PGMA-grafted filter papers revealed that, by utilizing either aprotic or protic solvents when washing the substrates, it was possible to either preserve or hydrolyze the epoxy groups. Independent of the solvent used, all grafted filter papers were essentially colorless after the washing procedure because of the low amount of copper required when performing ARGET ATRP. Nevertheless, surface modification of cellulose via ARGET ATRP truly facilitates the manufacturing since no thorough freeze-thaw degassing procedures are required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J.-S., & Matyjaszewski, K. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00125a035 · Cited by 4,622
Kato, M., Kamigaito, M., Sawamoto, M., & Higashimura, T. (1995) · Macromolecules · doi:10.1021/ma00109a056 · Cited by 3,046
Permanent, nonleaching antibacterial surfaces: 1. Synthesis by atom transfer radical polymerization
Lee, S. B., Koepsel, R. R., Morley, S. W., Matyjaszewski, K., Sun, Y., & Russell, A. J. (2004) · Biomacromolecules · doi:10.1021/bm034352k · Cited by 545
Use of ascorbic acid as reducing agent for synthesis of well-defined polymers by arget atrp
Min, K., Gao, H., & Matyjaszewski, K. (2007) · Macromolecules · doi:10.1021/ma0702041 · Cited by 380
Cited by
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas, B., Raj, M. C., B, A. K., H, R. M., Joy, J., Moores, A., Drisko, G. L., & Sanchez, C. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00627 · Cited by 1,714
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Xie, Y., Chen, C., Ren, X., Wang, X., Wang, H., & Wang, X. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.01.005 · Cited by 612
Electrochemically mediated atom transfer radical polymerization (eATRP)
Chmielarz, P., Fantin, M., Park, S., Isse, A. A., Gennaro, A., Magenau, A. J. D., Sobkowiak, A., & Matyjaszewski, K. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.005 · Cited by 355
Recent advances in nanocellulose processing, functionalization and applications: a review
Thakur, V., Guleria, A., Kumar, S., Sharma, S., & Singh, K. (2021) · Materials Advances · doi:10.1039/d1ma00049g · Cited by 302
Metadata
- Authors
- Hansson, S., Östmark, E., Carlmark, A., & Malmström, E.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-10-27
- Volume
- 1
- Issue
- 11
- Pages
- 2651-2659
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1992921901
- Cited by
- 165
- References
- 4
- FWCI
- 4.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.