The DOI matches its Crossref record.
Transparent Clay−Polymer Nano Brick Wall Assemblies with Tailorable Oxygen Barrier
Abstract
Thin films of sodium montmorillonite clay and branched polyethylenimine (PEI) are deposited on various substrates using layer-by-layer assembly. Films with 40 polymer−clay layers contain more than 84 wt% clay, have hardness as high as 1 GPa, and are completely transparent. Oxygen transmission rates (OTR) through these films decrease as the pH of PEI increases. These pH-tailorable properties are the result of changing PEI charge density, which causes the polymer to deposit more thickly at high pH because of low charge density. After 70 PEI (at pH 10)−clay layers are deposited onto 179 μm poly(ethylene terephthalate) film, the resulting 231 nm assembly has an OTR below the detection limit of commercial instrumentation (<0.005 cc/(m 2 day atm)). When multiplied by thickness, the resulting oxygen permeability is found to be less than 0.002 × 10 −6 cc/(m day atm)), which is lower than values typically reported for SiOx. This is the lowest permeability ever reported for a polymer−clay composite and is believed to be due to a brick wall nanostructure created by the alternate adsorption of polymeric mortar and highly oriented, exfoliated clay platelets. Because of their high level of transparency and gas barrier, these films are good candidates for a variety of flexible electronics, food, and pharmaceutical packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Duncan, T. V. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.017 · Cited by 2,029
Food packaging based on polymer nanomaterials
Silvestre, C., Duraccio, D., & Cimmino, S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.003 · Cited by 937
Gas barrier performance of graphene/polymer nanocomposites
Cui, Y., Kundalwal, S. I., & Kumar, S. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.018 · Cited by 715
Super Gas Barrier and Selectivity of Graphene Oxide‐Polymer Multilayer Thin Films
Yang, Y., Bolling, L., Priolo, M. A., & Grunlan, J. C. (2013) · Advanced Materials · doi:10.1002/adma.201202951 · Cited by 448
Self-citationSuper Gas Barrier of Transparent Polymer−Clay Multilayer Ultrathin Films
Priolo, M. A., Gamboa, D., Holder, K. M., & Grunlan, J. C. (2010) · Nano Letters · doi:10.1021/nl103047k · Cited by 321
Self-citation
Metadata
- Authors
- Priolo, M. A., Gamboa, D., & Grunlan, J. C.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-21
- Volume
- 2
- Issue
- 1
- Pages
- 312-320
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1977090672
- Cited by
- 224
- References
- 0
- FWCI
- 14.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Transparent Clay−Polymer Nano Brick Wall Assemblies with Tailorable Oxygen Barrier. https://app.cochat.ai/papers/10.1021/am900820k
- The paper
- Priolo, M. A., Gamboa, D., & Grunlan, J. C. (2010). Transparent Clay−Polymer Nano Brick Wall Assemblies with Tailorable Oxygen Barrier. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am900820k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.