The DOI matches its Crossref record.
Enzymatic Hydrolysis of Poly(lactide)s: Effects of Molecular Weight, l-Lactide Content, and Enantiomeric and Diastereoisomeric Polymer Blending
Abstract
Nonblended poly(L-lactide) (PLLA) films having different molecular weights and nonblended poly(lactide) (PLA) films, enantiomeric blend films from PLLA and poly(D-lactide) (PDLA), and diastereoisomeric blend films of poly(DL-lactide) (PDLLA) with either PLLA or PDLA, having different L-lactide (LLA) contents (X(LLA)s) in the range of 0-0.99, were amorphous made by melt-quenching. The effects of molecular weight, X(LLA), and average L- and D-lactyl unit sequence length (l(L) and l(D), respectively) on the enzymatic hydrolysis of the films were investigated in the presence of proteinase K. The enzymatic hydrolysis rate (R(EH)) of PLLA estimated by gravimetry increased monotonically with the inverse of number-average molecular weight (M(n)). The extrapolation of R(EH) of PLLA to M(n)(-1) = 0, where no exo-chain-scission takes place, gave a positive R(EH) value (1.75 microg/(mm(2).h)), meaning that the enzymatic hydrolysis of PLLA proceeds via both endo- and exo-chain-scission. The R(EH) of the nonblended films as well as the enantiomeric and diastereoisomeric blend films decreased monotonically with the decease in X(LLA) and finally became zero for X(LLA) below 0.3. The R(EH) values of the blend films of PLLA and PDLLA with PDLA (l(D) = infinity) were lower than expected, while the R(EH) values of the blend films of PLLA with PDLLA (l(D) = 4) agreed completely with the expected values. These results reveal that the nonblended PLA films are enzymatically hydrolyzable when X(LLA) and l(L) are higher than 0.3 and 3, respectively, and l(D) is lower than 10 and that the presence of long D-lactyl unit sequences (l(D) > 4) as in PDLA hinders the enzymatic hydrolysis of long L-lactyl unit sequences even when long D- and L-lactyl unit sequences are present in the different molecules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Self-citationBiodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 432
Slager, J., & Domb, A. J. (2003) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(03)00042-5 · Cited by 282
Metadata
- Authors
- Tsuji, H., & Miyauchi, S.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-04-24
- Volume
- 2
- Issue
- 2
- Pages
- 597-604
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2008658180
- Cited by
- 158
- References
- 0
- FWCI
- 3.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enzymatic Hydrolysis of Poly(lactide)s: Effects of Molecular Weight, l-Lactide Content, and Enantiomeric and Diastereoisomeric Polymer Blending. https://app.cochat.ai/papers/10.1021/bm010048k
- The paper
- Tsuji, H., & Miyauchi, S. (2001). Enzymatic Hydrolysis of Poly(lactide)s: Effects of Molecular Weight, l-Lactide Content, and Enantiomeric and Diastereoisomeric Polymer Blending. Biomacromolecules. https://doi.org/10.1021/bm010048k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.