Permanent, nonleaching antibacterial surfaces: 1. Synthesis by atom transfer radical polymerization
The DOI matches its Crossref record; 23 of the 25 references it cites were found in a registry or an index.
Abstract
We have grown an antimicrobial polymer directly on the surfaces of glass and paper using atom transfer radical polymerization (ATRP). The method described here results in potentially permanent nonleaching antibacterial surfaces without the need to chemically graft the antimicrobial material to the substratum. The tertiary amine 2-(dimethylamino)ethyl methacrylate was polymerized directly onto Whatman #1 filter paper or glass slides via atom transfer radical polymerization. Following the polymerization, the tertiary amino groups were quaternized using an alkyl halide to produce a large concentration of quaternary ammonium groups on the polymer-modified surfaces. Incubating the modified materials with either Escherichia coli or Bacillus subtilis demonstrated that the modified surfaces had substantial antimicrobial capacity. The permanence of the antimicrobial activity was demonstrated through repeated use of a modified glass without significant loss of activity. Quaternary amines are believed to cause cell death by disrupting cell membranes allowing release of the intracellular contents. Atomic force microscopic imaging of cells on modified glass surfaces supports this hypothesis.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The first antimicrobial surface with QA moieties prepared via surface initiated-ATRP (SI-ATRP) was reported by Matyjaszewski’s group [123].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [123]
In the citing paper
“In that study, 2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized directly onto filter paper via SI-ATRP.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [123]
In the citing paper
“Subsequent quaternization of the amino groups of p(DMAEMA) generated a high concentration of QA groups on the polymer-modified surface (Fig. 5 ).”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [123]
In the citing paper
“These modified surfaces exhibited substantial antimicrobial activities against Escherichia coli and Bacillus subtilis.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [123]
In the citing paper
“The authors found that biocidal activity increased with the density of available QA groups on the modified surface.”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [123]
Citations
Cites
Atom Transfer Radical Polymerization
Matyjaszewski, K., & Xia, J. (2001) · Chemical Reviews · doi:10.1021/cr940534g · Cited by 7,654
Self-citationWang, J.-S., & Matyjaszewski, K. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00125a035 · Cited by 4,622
Self-citationMetal-Catalyzed Living Radical Polymerization
Kamigaito, M., Ando, T., & Sawamoto, M. (2001) · Chemical Reviews · doi:10.1021/cr9901182 · Cited by 3,275
Agents that increase the permeability of the outer membrane
Vaara, M. (1992) · Microbiological Reviews · doi:10.1128/mr.56.3.395-411.1992 · Cited by 1,879
Functional polymers by atom transfer radical polymerization
Coessens, V., Pintauer, T., & Matyjaszewski, K. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00003-x · Cited by 1,262
Self-citationDesigning surfaces that kill bacteria on contact
Tiller, J. C., Liao, C.-J., Lewis, K., & Klibanov, A. M. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.111143098 · Cited by 1,196
Atom Transfer Radical Polymerization and the Synthesis of Polymeric Materials
Patten, T. E., & Matyjaszewski, K. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199808)10:12<901::aid-adma901>3.0.co;2-b · Cited by 896
Klueh, U., Wagner, V., Kelly, S., Johnson, A., & Bryers, J. D. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(2000)53:6<621::aid-jbm2>3.0.co;2-q · Cited by 442
Atom Transfer Radical Polymerization of (Meth)acrylamides
Teodorescu, M., & Matyjaszewski, K. (1999) · Macromolecules · doi:10.1021/ma990175x · Cited by 348
Self-citationTiller, J. C., Lee, S. B., Lewis, K., & Klibanov, A. M. (2002) · Biotechnology and Bioengineering · doi:10.1002/bit.10299 · Cited by 338
Self-citation
Research works printed but not linked: 3
- Golubovich V. N., 1974, Microbiology, 43, 948
- Lin J., 2002, Biotechnol. Prog., 18, 1086
- Standard Test Method, 2002, West Conshohocken, PA, 1600
Cited by
Items 201–300 of 555
Covalent layer‐by‐layer assembly of polyethyleneimine multilayer for antibacterial applications
He, T., & Chan, V. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32872 · Cited by 63
Hou, A., Feng, G., Zhuo, J., & Sun, G. Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09993 · Cited by 57
Chen, X., Cai, K., Fang, J., Lai, M., Li, J., Hou, Y., Luo, Z. Y., Hu, Y., & Tang, L. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.11.049 · Cited by 60
PBA–PMMA 3‐Arm Star Block Copolymer Thermoplastic Elastomers
Dufour, B., Koynov, K., Pakuła, T., & Matyjaszewski, K. A. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800151 · Cited by 56
Self-citationAntibacterial Polyelectrolyte Micelles for Coating Stainless Steel
Falentin‐Daudre, C., Faure, E., Svaldo-Lanero, T., Farina, F., Jérôme, C., de Weerdt, C. V., MARTIAL, J. A., Duwez, A., & Detrembleur, C. (2012) · Langmuir · doi:10.1021/la3003965 · Cited by 56
Antimicrobial Fibers: Therapeutic Possibilities and Recent Advances
Bshena, O., Heunis, T. D. J., Dicks, L. M. T., & Klumperman, B. (2011) · Future Medicinal Chemistry · doi:10.4155/fmc.11.131 · Cited by 60
Cavallaro, A., Mierczynska, A., Barton, M., Majewski, P., & Vasilev, K. (2016) · Biofouling · doi:10.1080/08927014.2015.1115977 · Cited by 55
“These studies were conducted under low nutrient conditions similar to those used repeatedly throughout the literature for the antibacterial assessment of QAC based coatings (Gottenbos et al. 2002; Lee et al. 2004; Milović et al. 2005; Li et al. 2006, 2011).”
MethodCharged hydrophilic polymer brushes and their relevance for understanding marine biofouling
Yandi, W., Mieszkin, S., Fino, A. D., Martin‐Tanchereau, P., Callow, M. E., Callow, J. A., Tyson, L., Clare, A. S., & Ederth, T. (2016) · Biofouling · doi:10.1080/08927014.2016.1170816 · Cited by 59
Li, Y., Yang, D., Li, P., & Li, Z. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.049 · Cited by 54
Mendonça, P. V., Konkolewicz, D., Averick, S. E., Serra, A. C., Popov, A. V., Guliashvili, T., Matyjaszewski, K. A., & Coelho, J. F. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00707g · Cited by 53
Self-citationRao, K. M., Rao, K. S. V. K., Ramanjaneyulu, G., Rao, K. C., Subha, M. C. S., & Ha, C. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34991 · Cited by 53
Decontamination of chemical and biological warfare agents with a single multi-functional material
Amitai, G., Murata, H., Andersen, J. D., Koepsel, R. R., & Russell, A. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.004 · Cited by 54
Self-citationEngland, M. W., Sato, T., Urata, C., Wang, L., & Hozumi, A. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.06.038 · Cited by 53
The use of nanomaterials for the mitigation of pathogenic biofilm formation
Elbourne, A. J., Truong, V. K., Cheeseman, S., Rajapaksha, P., Gangadoo, S., Chapman, J., & Crawford, R. J. (2019) · Methods in microbiology · doi:10.1016/bs.mim.2019.04.002 · Cited by 54
Koromilas, N. D., Lainioti, G. C., Oikonomou, E. K., Bokias, G., & Kallitsis, J. K. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.02.009 · Cited by 52
Hwang, G., Koltisko, B., Jin, X., & Koo, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11558 · Cited by 52
Abdolahi, A., HAMZAH, E. B., Ibrahim, Z., & Hashim, S. (2014) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2014.946188 · Cited by 54
RAFT mediated polysaccharide copolymers
Fleet, R., McLeary, J. B., Grumel, V., Weber, W. G., Matahwa, H., & Sanderson, R. D. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.06.042 · Cited by 52
Rostaing, L. P. E., Moreau-Gaudry, X., Baron, E., Cisterne, J. M., Bernadet-Monrozies, P., & Durand, D. (1997) · PubMed · Cited by 57
Punyani, S., & Singh, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24181 · Cited by 49
Durable antimicrobial finishing of cellulose with QSA silicone by supercritical adsorption
Chen, Y., Niu, M., Shu, Y., & Teng, H. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.09.165 · Cited by 52
Coad, B. R., Lu, Y., & Meagher, L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.006 · Cited by 49
Zhang, L., & Sun, Y. P. (2018) · Biochemical Engineering Journal · doi:10.1016/j.bej.2018.01.013 · Cited by 50
Self-citationDiscovery of a Potent GLUT Inhibitor from a Library of Rapafucins by Using 3D Microarrays
Guo, Z., Cheng, Z., Wang, J., Liu, W., Peng, H., Wang, Y., Rao, A., Li, R., Ying, X., Korangath, P. C., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201905578 · Cited by 51
Wang, Y., Liu, S., Ding, K., Zhang, Y., Ding, X., & Mi, J. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00227a · Cited by 49
Formation of Superhydrophobic Surfaces by Biomimetic Silicification and Fluorination
Cho, W. K., Kang, S. M., Kim, D. J., Yang, S. H., & Choi, I. S. (2006) · Langmuir · doi:10.1021/la062191a · Cited by 48
Karamdoust, S., Yu, B., Bonduelle, C. V., Liu, Y., Davidson, G., Stojcevic, G., Yang, J., Lau, W., & Gillies, E. R. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15814k · Cited by 51
Photophysics and Light-Activated Biocidal Activity of Visible-Light-Absorbing Conjugated Oligomers
Parthasarathy, A., Goswami, S., Corbitt, T. S., Ji, E., Dascier, D., Whitten, D. G., & Schanze, K. S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400282p · Cited by 45
Zhao, Y., Zhu, L.-P., Jiang, J., Yi, Z., Zhu, B., & Xu, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5019589 · Cited by 45
Kliewer, S., Wicha, S. G., Broeker, A., Naundorf, T., Catmadim, T., Oellingrath, E. K., Rohnke, M., Streit, W. R., Vollstedt, C., Kipphardt, H., et al. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110679 · Cited by 48
Zhai, G., Shi, Z. L., Kang, E. T., & Neoh, K. G. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500079 · Cited by 44
Dogra, N., Choudhary, R., Kohli, P., Haddock, J. D., Makwana, S., Horev, B., Vinokur, Y., Droby, S., & Rodov, V. (2015) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf505442w · Cited by 44
Antibacterial fluoromicas: A novel delivery medium
Dizman, B., Badger, J. C., Elasri, M. O., & Mathias, L. J. (2007) · Applied Clay Science · doi:10.1016/j.clay.2007.01.002 · Cited by 44
Preparation, structure and properties of multi-functional silk via ATRP method
Xing, T., Hu, W., Li, S., & Chen, G. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.11.065 · Cited by 44
Patrucco, E., Ouasti, S., Vo, C., Leonardis, P. D., Pollicino, A., Armes, S. P., Scandola, M., & Tirelli, N. (2009) · Biomacromolecules · doi:10.1021/bm900856r · Cited by 48
Yin, J.-J., Wahid, F., Zhang, Q., Tao, Y.-C., Zhong, C., & Chu, L. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700069 · Cited by 45
Cloutier, M., Tolouei, R., Lesage, O., Lévesque, L., Turgeon, S., Tatoulian, M., & Mantovani, D. (2014) · Biointerphases · doi:10.1116/1.4871435 · Cited by 48
Banerjee, S., Paira, T. K., & Mandal, T. K. (2014) · Polymer Chemistry · doi:10.1039/c4py00007b · Cited by 46
Hybrid siloxane epoxy coatings containing quaternary ammonium moieties
Pant, R. R., Buckley, J. L., Fulmer, P. A., Wynne, J. H., McCluskey, D. M., & Phillips, J. P. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28670 · Cited by 43
Self-Sterilizing, Self-Cleaning Mixed Polymeric Multifunctional Antimicrobial Surfaces
Pappas, H. C., Phan, S., Yoon, S., Edens, L. E., Meng, X., Schanze, K. S., Whitten, D. G., & Keller, D. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06852 · Cited by 48
Selfprotective smart orthopedic implants
Parvizi, J., Antoci, V., Hickok, N. J., & Shapiro, I. M. (2006) · Expert Review of Medical Devices · doi:10.1586/17434440.4.1.55 · Cited by 43
Adjustable wettability of methyl methacrylate modified ramie fiber
Liu, Z., Sun, C., Liu, Z., & Lü, J. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28259 · Cited by 43
Yu, Q., Ge, W., Atewologun, A., Stiff‐Roberts, A. D., & López, G. P. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.12.043 · Cited by 46
Fadida, T., Kroupitski, Y., Peiper, U. M., Bendikov, T. A., Sela, S., & Poverenov, E. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.07.003 · Cited by 42
Overview Perspective of Bacterial Strategies of Resistance to Biocides and Antibiotics
Navidinia, M., & Goudarzi, M. (2019) · Archives of Clinical Infectious Diseases · doi:10.5812/archcid.65744 · Cited by 55
Wang, C., Zolotarskaya, O. Y., Ashraf, K. M., Wen, X., Ohman, D. E., & Wynne, K. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04697 · Cited by 44
Yu, X. Y., Yang, Y., Yang, W., Wang, X., Liu, X., Zhou, F., & Zhao, Y. J. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.12.038 · Cited by 44
Yao, D., Guo, Y., Chen, S., Tang, J., & Chen, Y. (2013) · Polymer · doi:10.1016/j.polymer.2013.05.005 · Cited by 44
Hiltunen, M., Raula, J., & Maunu, S. L. (2011) · Polymer International · doi:10.1002/pi.3090 · Cited by 42
Yatvin, J., Gao, J., & Locklin, J. (2014) · Chemical Communications · doi:10.1039/c4cc02803a · Cited by 41
Wang, B., Jin, T., Han, Y., Shen, C., Li, Q., Tang, J., Chen, H., & Lin, Q. (2015) · International Journal of Polymeric Materials · doi:10.1080/00914037.2015.1055631 · Cited by 41
Thiabicyclononane-Based Antimicrobial Polycations
Geng, Z., & Finn, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07596 · Cited by 45
Dong, J., Muszanska, A. K., Fei, X., Falkenberg, R., van de Belt‐Gritter, B., & Loontjens, T. J. A. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02549 · Cited by 42
Xia, B., Dong, C., Lu, Y., Rong, M. Z., Lv, Y.-Z., & Shi, J. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.09.056 · Cited by 45
Synthesis and antibacterial characterization of gemini surfactant monomers and copolymers
Zhang, Y., Ding, M., Zhou, L., Tan, H. S., Li, J., Xiao, H., Li, J., & Snow, J. (2012) · Polymer Chemistry · doi:10.1039/c2py00558a · Cited by 42
Hansson, S., Antoni, P., Bergenudd, H., & Malmström, E. (2010) · Polymer Chemistry · doi:10.1039/c0py00388c · Cited by 40
Chen, Y., & Han, Q. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.01.115 · Cited by 40
Berndt, E., Behnke, S., Dannehl, A., Gajda, A., Wingender, J., & Ulbricht, M. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.002 · Cited by 45
Zuo, H., Wu, D., & Fu, R. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.35303 · Cited by 43
Chi, Y.-S. (2005) · Bulletin of the Korean Chemical Society · doi:10.5012/bkcs.2005.26.3.361 · Cited by 39
Tastet, D., Save, M., Charrier, F., Charrier, B., Ledeuil, J., Dupin, J., & Billon, L. (2010) · Polymer · doi:10.1016/j.polymer.2010.12.046 · Cited by 41
Chen, J., Yi, J., Sun, P., Liu, Z., & Liu, Z.-W. (2009) · Cellulose · doi:10.1007/s10570-009-9343-8 · Cited by 39
Clickable poly(ionic liquid)s for modification of glass and silicon surfaces
He, H., Averick, S. E., Roth, E. A., Luebke, D. R., Nulwala, H., & Matyjaszewski, K. A. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.045 · Cited by 38
Self-citationSalmi-Mani, H., Terreros, G., Barroca-Aubry, N., Aymes‐Chodur, C., Regeard, C., & Roger, P. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.038 · Cited by 38
Infection resistant polymer brush coating on the surface of biodegradable polyester
Dhingra, S., Joshi, A., Singh, N., & Saha, S. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111465 · Cited by 38
Fortuniak, W., Mizerska, U., Chojnowski, J., Basińska, T., Słomkowski, S., Chehimi, M. M., Konopacka, A., Turecka, K., & Werel, W. (2011) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-011-9485-7 · Cited by 41
Lei, Y., Zhou, S., Dong, C., Zhang, A., & Lin, Y. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.01.007 · Cited by 39
Wei, D., Zhou, R., Guan, Y. P., Zheng, A., & Zhang, Y. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37849 · Cited by 38
Li, H., Cui, R., Peng, L., Cai, S., Li, P., & Lan, T. (2017) · Polymers · doi:10.3390/polym10010015 · Cited by 38
Synthesis of PNIPAM-co-MBAA Copolymer Nanotubes with Composite Control
Cui, Y., Cheng, T., Tian, Y., He, Q. Z., & Li, J. (2006) · Langmuir · doi:10.1021/la0605079 · Cited by 37
Copper-Mediated Atom Transfer Radical Polymerization
Matyjaszewski, K. A., & Spanswick, J. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00071-6 · Cited by 39
Self-citationSynthesis, properties, and antibacterial activity of polyphosphonium semi-interpenetrating networks
Cuthbert, T. J., Harrison, T. D., Ragogna, P. J., & Gillies, E. R. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00641h · Cited by 41
Ionescu, A. C., Brambilla, E., Travan, A., Marsich, E., Donati, I., Gobbi, P., Turco, G., Lenarda, R. D., Cadenaro, M., Paoletti, S., et al. (2015) · Journal of Dentistry · doi:10.1016/j.jdent.2015.10.006 · Cited by 36
Kelly, A. M., Kaltenhauser, V., Mühlbacher, I., Rametsteiner, K., Kren, H., Slugovc, C., Stelzer, F., & Wiesbrock, F. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200240 · Cited by 37
El‐Khouly, A. S., Kenawy, E., Safaan, A. A., Takahashi, Y., Hafiz, Y. A., Sonomoto, K., & Zendo, T. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.047 · Cited by 36
He, M., Xiao, H., Zhou, Y., & Lü, P. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00029g · Cited by 36
Li, S., Wei, D., Guan, Y. P., & Zheng, A. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.12.004 · Cited by 35
da Silva, F. A. G., Alcaraz‐Espinoza, J. J., da Costa, M. M., & de Oliveira, H. P. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.027 · Cited by 35
Weng, Y., Guo, X., Chong, V. J., Howard, L., Gregory, R. L., & Xie, D. (2011) · Journal of Biomedical Science and Engineering · doi:10.4236/jbise.2011.43021 · Cited by 34
“These materials are found to be capable of killing bacteria that are resistant to other types of cationic antibacterials [15].”
A novel furanone-modified antibacterial dental glass ionomer cement
Weng, Y., Howard, L., Chong, V. J., Sun, J., Gregory, R. L., & Xie, D. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.038 · Cited by 34
Billy, M., da Costa, A. R., Lochon, P., Clément, R., Dresch, M., Étienne, S., Hiver, J. M., David, L., & Jonquières, A. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.01.021 · Cited by 36
Biomimetic Encapsulation of Individual Cells with Silica
Yang, S. H., Lee, K., Kong, B., Kim, J., Kim, H., & Choi, I. S. (2009) · Angewandte Chemie · doi:10.1002/ange.200903010 · Cited by 34
Yüksel, E., & Karakeçili, A. G. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.10.004 · Cited by 34
Izzo, L., Matrella, S., Mella, M., Benvenuto, G., & Vigliottá, G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02903 · Cited by 34
Design and application of dextran carrier
Huang, S., & Huang, G. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.101392 · Cited by 35
Laopa, P., Vilaivan, T., & Hoven, V. P. (2012) · The Analyst · doi:10.1039/c2an36133g · Cited by 36
Mei, L., Zhang, X., Wang, Y., Zhang, W., Lu, Z., Luo, Y., Zhao, Y., & Li, C. (2014) · Polymer Chemistry · doi:10.1039/c3py01578e · Cited by 32
Suppressing Pseudomonas aeruginosa adhesion via non-fouling polymer brushes
Rodriguez‐Emmenegger, C., Decker, A., Surman, F., Preuss, C. M., Sedláková, Z., Zydziak, N., Barner‐Kowollik, C., Schwartz, T., & Barner, L. (2014) · RSC Advances · doi:10.1039/c4ra12663g · Cited by 35
Li, L., Ke, Z., Yan, G., & Wu, J. (2008) · Polymer International · doi:10.1002/pi.2474 · Cited by 32
Bhaisare, M. L., Wu, B.-S., Wu, M.-C., Khan, M. S., Tseng, M., & Wu, H. (2015) · Biomaterials Science · doi:10.1039/c5bm00342c · Cited by 32
Foksowicz‐Flaczyk, J., Walentowska, J., Przybylak, M., & Maciejewski, H. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.06.062 · Cited by 32
Nigmatullin, R., Gao, F., & Konovalova, V. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900166 · Cited by 33
Ge, W., Yu, Q., López, G. P., & Stiff‐Roberts, A. D. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.01.033 · Cited by 31
Li, C. Y., Xu, F., & Yang, W. (2012) · Langmuir · doi:10.1021/la302866n · Cited by 32
Antimicrobial polymeric paints: An up‐to‐date review
Gupta, S., Puttaiahgowda, Y. M., Nagaraja, A., & Jalageri, M. D. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5485 · Cited by 33
Paris, J.-B., Seyer, D., Jouenne, T., & Thébault, P. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.05.025 · Cited by 31
RAFT Graft Polymerization of 2-(Dimethylaminoethyl) Methacrylate onto Cellulose Fibre
Roy, D., Guthrie, J. T., & Perrier, S. (2006) · Australian Journal of Chemistry · doi:10.1071/ch06247 · Cited by 31
Bioinspired Bottlebrush Polymers Effectively Alleviate Frictional Damage Both In Vitro and In Vivo
Phạm, D. A., Wang, C., Séguy, L., Zhang, H., Benbabaali, S., Faivre, J., Sim, S., Xie, G., Olszewski, M., Rabanel, J., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401689 · Cited by 30
Self-citationMehta, H., Kaur, G., Chaudhary, G. R., Prabhakar, N., Kaul, S., & Singhal, N. K. (2022) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2022.128657 · Cited by 30
Cheng, L., Weir, M. D., Limkangwalmongkol, P., Hack, G. D., Xu, H. H. K., Chen, Q., & Zhou, X. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32505 · Cited by 30
Metadata
- Authors
- Lee, S. B., Koepsel, R. R., Morley, S. W., Matyjaszewski, K., Sun, Y., & Russell, A. J.
- Affiliations
- University of Pittsburgh (US)
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-27
- Volume
- 5
- Issue
- 3
- Pages
- 877-882
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1963734278
- Cited by
- 545
- References
- 25
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 8 · 2023: 11 · 2022: 9 · 2021: 20 · 2020: 18 · 2019: 28 · 2018: 26 · 2017: 33 · 2016: 30 · 2015: 46 · 2014: 40 · 2013: 28 · 2012: 40
- FWCI
- 11.16
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Multidisciplinary University Research Initiative
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- antibacterial surfaces, atom transfer radical polymerization, quaternary ammonium polymers, 2-(dimethylamino)ethyl methacrylate, quaternization, filter paper, glass surfaces, Escherichia coli, Bacillus subtilis, membrane damage, surface modification
- MeSH terms
- Anti-Bacterial Agents, Bacillus subtilis, Escherichia coli, Polymers, Surface Properties, Microscopy, Atomic Force
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.