Influence of in Vitro Hydrolytic Degradation on the Morphology and Crystallization Behavior of Poly(p-dioxanone)
The DOI matches its Crossref record.
Abstract
We have studied the hydrolytic degradation of high molecular weight poly(p-dioxanone), PPDX, sutures. The samples were degraded either in distilled water or in a phosphate buffer at 37 degrees C, and the starting viscosity-average molecular weight was 130 kg/mol. The hydrolytic degradation of PPDX occurs in an approximate two stage process where the amorphous regions of the sample are attacked faster than the crystalline regions of the sample. The changes experienced by the samples as degradation proceeded were successfully monitored by viscosimetry, differential scanning calorimetry (DSC), weight loss, pH changes, and scanning electron microscopy (SEM). Polarized optical microscopy (POM) observations performed on PPDX films revealed that PPDX crystallizes in spherulites whose detailed morphology depends on the supercooling employed during isothermal crystallization. Changes in the spherulitic morphology as molecular weight is reduced are only pronounced when the molecular weight is equal or lower than 8 kg/mol. The dependence of lamellar thickness as a function of isothermal crystallization temperature was examined by atomic force microscopy (AFM) in thin films of PPDX together with melting point data obtained by DSC. Through the use of the Thomson-Gibbs equation, we obtained a value of 166 erg/cm2 for the fold surface free energy of PPDX. This value is in the same range as those obtained previously for similar linear polyesters. The lamellar thickness, as well as the melting point, was found to have a small decreasing dependence with the molecular weight of the samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Thermal fractionation of polymers
Müller, A. J., & Arnal, M. L. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.03.001 · Cited by 376
Self-citationBiomimetic materials in tissue engineering
Patterson, J., Martino, M. M., & Hubbell, J. A. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70013-4 · Cited by 280
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Larrañaga, A., & Lizundia, E. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109296 · Cited by 257
Castillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253
Self-citationZheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Metadata
- Authors
- Sabino, M. A., Albuerne, J., Müller, A. J., Brisson, J., & Prud'homme, R. E.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-01-08
- Volume
- 5
- Issue
- 2
- Pages
- 358-370
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2029544397
- Cited by
- 99
- References
- 0
- FWCI
- 2.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of in Vitro Hydrolytic Degradation on the Morphology and Crystallization Behavior of Poly(p-dioxanone). https://app.cochat.ai/papers/10.1021/bm034367i
- The paper
- Sabino, M. A., Albuerne, J., Müller, A. J., Brisson, J., & Prud'homme, R. E. (2004). Influence of in Vitro Hydrolytic Degradation on the Morphology and Crystallization Behavior of Poly(p-dioxanone). Biomacromolecules. https://doi.org/10.1021/bm034367i
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.