The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Chemical Synthesis of Fully Biomass-Based Poly(butylene succinate) from Inedible-Biomass-Based Furfural and Evaluation of Its Biomass Carbon Ratio
Abstract
We have produced fully biomass-based poly(butylene succinate) (PBS) from furfural produced from inedible agricultural cellulosic waste. Furfural was oxidized to give fumaric acid. Fumaric acid was hydrogenated under high pressure with a palladium-rhenium/carbon catalyst to give 1,4-butanediol, and with a palladium/carbon catalyst to give succinic acid. Dimethyl succinate was synthesized from fumaric acid by esterification and hydrogenation under normal pressure. Fully biomass-based PBS was obtained by polycondensation of biomass-based 1,4-butanediol and biomass-based succinic acid or dimethyl succinate. The biomass carbon ratio calculated from (14)C concentrations measured by accelerator mass spectroscopy (AMS) verified that the PBS obtained in this study contained only biomass carbon. The polycondensation of biomass-based 1,4-butanediol and petroleum-based terephthalic acid or dimethyl terephthalate gave partially biomass-based poly(butylene terephthalate), which is an engineering plastic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Morschbacker, A. (2009) · Polymer Reviews · doi:10.1080/15583720902834791 · Cited by 278
Cited by
Conversion of biomass to selected chemical products
Gallezot, P. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15147a · Cited by 2,552
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Levulinic Acid Biorefineries: New Challenges for Efficient Utilization of Biomass
Pileidis, F. D., & Titirici, M. (2016) · ChemSusChem · doi:10.1002/cssc.201501405 · Cited by 630
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Metadata
- Authors
- Tachibana, Y., Masuda, T., Funabashi, M., & Kunioka, M.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-09-03
- Volume
- 11
- Issue
- 10
- Pages
- 2760-2765
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2081936688
- Cited by
- 158
- References
- 3
- FWCI
- 3.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.