The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
High-Performance Polylactide/ZnO Nanocomposites Designed for Films and Fibers with Special End-Use Properties
Abstract
Metallic oxides have been successfully investigated for the recycling of polylactide (PLA) via catalyzed unzipping depolymerization allowing for the selective recovery of lactide monomer. In this contribution, a metallic oxide nanofiller, that is, ZnO, has been dispersed into PLA without detrimental polyester degradation yielding PLA/ZnO nanocomposites directly suitable for producing films and fibers. The nanocomposites were produced by melt-blending two different grades of PLA with untreated ZnO and surface-treated ZnO nanoparticles. The surface treatment by silanization proved to be necessary for avoiding the decrease in molecular weight and thermal and mechanical properties of the filled polyester matrix. Silane-treated ZnO nanoparticles yielded nanocomposites characterized by good mechanical performances (tensile strength in the interval from 55 to 65 MPa), improved thermal stability, and fine nanofiller dispersion, as evidenced by microscopy investigations. PLA/ZnO nanocomposites were further extruded in films and fibers, respectively, characterized by anti-UV and antibacterial properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Paul, M.-A., Alexandre, M., Degée, P., Henrist, C., Rulmont, A., & Dubois, P. (2003) · Polymer · doi:10.1016/s0032-3861(02)00778-4 · Cited by 480
Self-citationVillmow, T., Pötschke, P., Pegel, S., Häußler, L., & Kretzschmar, B. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.010 · Cited by 413
Thermal degradation of commercially available organoclays studied by TGA–FTIR
Cervantes‐Uc, J. M., Cauich‐Rodríguez, J. V., Vázquez‐Torres, H., Garfias-Mesias, L. F., & Paul, D. R. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2007.03.008 · Cited by 305
The production and properties of polylactide composites filled with expanded graphite
Murariu, M., Dechief, A. L., Bonnaud, L., Paint, Y., Gallos, A., Fontaine, G., Bourbigot, S., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.12.019 · Cited by 286
Self-citationA study on the photo-degradation of zinc oxide (ZnO) filled polypropylene nanocomposites
Zhao, H., & Li, R. K. Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.089 · Cited by 270
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Fan, Y., Nishida, H., Mori, T., Shirai, Y., & Endo, T. (2004) · Polymer · doi:10.1016/j.polymer.2003.12.058 · Cited by 171
Murariu, M., Bonnaud, L., Yoann, P., Fontaine, G., Bourbigot, S., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.032 · Cited by 171
Self-citationAntibacterial activity of ZnO powder with crystallographic orientation
Ohira, T., Yamamoto, O., Iida, Y., & NAKAGAWA, Z.-E. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3246-8 · Cited by 137
Abe, H., Takahashi, N., Kim, K. J., Mochizuki, M., & Doi, Y. (2004) · Biomacromolecules · doi:10.1021/bm0497872 · Cited by 108
Solarski, S., Mahjoubi, F., Ferreira, M., Devaux, É., Bachelet, P., Bourbigot, S., Delobel, R., Coszach, P., Murariu, M., Ferreira, A. D. S., et al. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0911-0 · Cited by 107
Self-citationKinetics of the thermal decomposition of processed poly(lactic acid)
Carrasco, F., Pagès, P., Gámez‐Pérez, J., Pérez, O. O. S., & Rulduà, M. L. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.039 · Cited by 82
Solarski, S., Ferreira, M., Devaux, É., Fontaine, G., Bachelet, P., Bourbigot, S., Delobel, R., Coszach, P., Murariu, M., Ferreira, A. D. S., et al. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28138 · Cited by 80
Self-citationGoffin, A., Duquesne, E., Moins, S., Alexandre, M., & Dúbois, P. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.07.041 · Cited by 79
Nano‐Level Mixing of ZnO into Poly(methyl methacrylate)
Agrawal, M., Gupta, S., Zafeiropoulos, N. E., Oertel, U., Häßler, R., & Stamm, M. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000191 · Cited by 46
Preparation and characterizations of highly transparent UV-curable ZnO-acrylic nanocomposites
Huang, H., & Hsieh, T.-E. (2010) · Ceramics International · doi:10.1016/j.ceramint.2010.01.010 · Cited by 44
Optical and thermo electrical properties of ZnO nano particle filled polystyrene
Gaur, M. S., Singh, P. K., & Chauhan, R. S. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32422 · Cited by 37
Study on synthesis of polylac-tide from kitchen garbage
Wang, Q. (2005) · Chinese Science Bulletin · doi:10.1360/982004-712 · Cited by 8
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Cited by
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Self-citationPLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Self-citationKim, I., Viswanathan, K., Kasi, G., Thanakkasaranee, S., Sadeghi, K., & Seo, J. (2022) · Food Reviews International · doi:10.1080/87559129.2020.1737709 · Cited by 441
Nanotechnology: An Untapped Resource for Food Packaging
Sharma, C., Dhiman, R., Rokana, N., & Panwar, H. (2017) · Frontiers in Microbiology · doi:10.3389/fmicb.2017.01735 · Cited by 389
Shankar, S., Wang, L.-F., & Rhim, J.-W. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.08.002 · Cited by 369
Metadata
- Authors
- Murariu, M., Doumbia, A., Bonnaud, L., Dechief, A., Paint, Y., Ferreira, M., Campagne, C., Devaux, E., & Dubois, P.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-04-19
- Volume
- 12
- Issue
- 5
- Pages
- 1762-1771
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1983037469
- Cited by
- 286
- References
- 20
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.