The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Surface Modification of Natural Fibers Using Bacteria: Depositing Bacterial Cellulose onto Natural Fibers To Create Hierarchical Fiber Reinforced Nanocomposites
Abstract
Triggered biodegradable composites made entirely from renewable resources are urgently sought after to improve material recyclability or be able to divert materials from waste streams. Many biobased polymers and natural fibers usually display poor interfacial adhesion when combined in a composite material. Here we propose a way to modify the surfaces of natural fibers by utilizing bacteria ( Acetobacter xylinum) to deposit nanosized bacterial cellulose around natural fibers, which enhances their adhesion to renewable polymers. This paper describes the process of modifying large quantities of natural fibers with bacterial cellulose through their use as substrates for bacteria during fermentation. The modified fibers were characterized by scanning electron microscopy, single fiber tensile tests, X-ray photoelectron spectroscopy, and inverse gas chromatography to determine their surface and mechanical properties. The practical adhesion between the modified fibers and the renewable polymers cellulose acetate butyrate and poly(L-lactic acid) was quantified using the single fiber pullout test.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Cellulose biosynthesis and function in bacteria
Ross, P., Mayer, R., & Benziman, M. (1991) · Microbiological Reviews · doi:10.1128/mr.55.1.35-58.1991 · Cited by 1,248
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Optically Transparent Composites Reinforced with Networks of Bacterial Nanofibers
Yano, H., Sugiyama, J., Nakagaito, A. N., Nogi, M., Matsuura, T., Hikita, M., & Handa, K. (2005) · Advanced Materials · doi:10.1002/adma.200400597 · Cited by 975
A microbond method for determination of the shear strength of a fiber/resin interface
Miller, B., Muri, P., & Rebenfeld, L. (1987) · Composites Science and Technology · doi:10.1016/0266-3538(87)90059-5 · Cited by 655
Netravali, A. N., & Chabba, S. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00427-9 · Cited by 649
Nanocelluloses as Innovative Polymers in Research and Application
Klemm, D., Schumann, D., Kramer, F., Heßler, N., Hornung, M., Schmauder, H.-P., & Marsch, S. (2006) · Advances in Polymer Science · doi:10.1007/12_097 · Cited by 491
Nanocomposites of cellulose acetate butyrate reinforced with cellulose nanocrystals
Grunert, M., & Winter, W. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021065905986 · Cited by 465
Cited by
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationIonic Liquids and Their Interaction with Cellulose
Pinkert, A., Marsh, K. N., Pang, S., & Staiger, M. P. (2009) · Chemical Reviews · doi:10.1021/cr9001947 · Cited by 1,508
Polymers from Renewable Resources: A Challenge for the Future of Macromolecular Materials
Gandini, A. (2008) · Macromolecules · doi:10.1021/ma801735u · Cited by 1,113
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Sacui, I. A., Nieuwendaal, R. C., Burnett, D. J., Stranick, S. J., Jorfi, M., Weder, C., Foster, E. J., Olsson, R. T., & Gilman, J. W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500359f · Cited by 647
Present status and applications of bacterial cellulose-based materials for skin tissue repair
Fu, L., Zhang, J., & Yang, G. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.071 · Cited by 523
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
Lee, K.-Y., Buldum, G., Mantalaris, A., & Bismarck, A. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201300298 · Cited by 435
Self-citationCellulose Nanomaterials—Binding Properties and Applications: A Review
Tayeb, A., Amini, E., Ghasemi, S., & Tajvidi, M. (2018) · Molecules · doi:10.3390/molecules23102684 · Cited by 433
Choo, K., Ching, Y., Chuah, C., Julai, S., & Liou, N.-S. (2016) · Materials · doi:10.3390/ma9080644 · Cited by 404
Zhang, T., Wang, W., Zhang, D., Zhang, X., Ma, Y., Zhou, Y., & Qi, L. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902104 · Cited by 365
Bacterial Cellulose: Production, Characterization, and Application as Antimicrobial Agent
Lahiri, D., Nag, M., Dutta, B., Dey, A., Sarkar, T., Pati, S., Edinur, H. A., Abdul Kari, Z., Mohd Noor, N. H., & Ray, R. R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222312984 · Cited by 357
A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications
Zwawi, M. (2021) · Molecules · doi:10.3390/molecules26020404 · Cited by 349
Song, Z., Xiao, H., & Zhao, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.049 · Cited by 298
Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.04.009 · Cited by 289
Rheology of nanocellulose-rich aqueous suspensions: A Review
Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017) · BioResources · doi:10.15376/biores.12.4.hubbe · Cited by 289
Bacterial cellulose micro-nano fibres for wound healing applications
Ahmed, J., Gultekinoglu, M., & Edirisinghe, M. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107549 · Cited by 259
Applications of cellulose nanofibrils in drug delivery
Gopi, S., Balakrishnan, P., Geethamma, V. G., Pius, A., & Thomas, S. (2018) · Applications of Nanocomposite Materials in Drug Delivery · doi:10.1016/b978-0-12-813741-3.00004-2 · Cited by 13
Metadata
- Authors
- Pommet, M., Juntaro, J., Heng, J. Y. Y., Mantalaris, A., Lee, A. F., Wilson, K., Kalinka, G., Shaffer, M. S. P., & Bismarck, A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-05-21
- Volume
- 9
- Issue
- 6
- Pages
- 1643-1651
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2012625939
- Cited by
- 267
- References
- 31
- FWCI
- 11.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.