CoChat

Strategies for Improved dCO 2 Removal in Large‐Scale Fed‐Batch Cultures

Mostafa, Sigma S., Gu, Xuejun (Sherry) · 2003 · Biotechnology Progress

The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.

Abstract

Carbon dioxide buildup in large‐scale reactors can be detrimental to cell growth and productivity. In case of protein X, a therapeutic glycoprotein, when cultures were scaled up from bench scale to the pilot plant, there was a 40% loss of specific productivity. The dissolved CO 2 (dCO 2 ) level was 179 ± 9 mmHg at the pilot plant scale and 68 ± 13 mmHg at bench scale. The authors proposed a comprehensive approach to maintain dCO 2 levels between 40 and 120 mmHg throughout the 14‐day fed‐batch process. A cell‐free experiment was used to investigate the impact of the following parameters on dCO 2 removal: (1) sparge rate, (2) agitator speed, (3) bubble size, (4) bicarbonate concentration, (5) impeller position, and (6) aeration rate at the headspace of bioreactor. dCO 2 was measured using a fiber optic based probe. dCO 2 removal rate was a strong function of sparge rate and a weak function of agitator speed. Bubble size was modulated by the presence or absence of a sparge stone (10 μm pore size, 1 cm pipe i.d.). Open pipe provided 3‐ to 4‐fold better dCO 2 removal for the same mass transfer coefficient ( k L a) value. A mathematical model and a bench‐scale experiment indicated that the benefit of a lower level of sodium bicarbonate in the culture medium was transient for batch and fed‐batch cultures. Thus, this strategy was not used at pilot scale. Decreasing top impeller position improved k L a of dCO 2 by 2‐fold. Changing headspace aeration rate from 0.02 to 0.04 vvm had no impact on dCO 2 removal. Two pilot runs were conducted using (A) open pipe and (B) antifoam in the presence of sparge stone, both in conjunction with lower impeller position. The presence of antifoam may interfere in product purification; however, demonstration of antifoam removal can be difficult. Open pipe allowed an alternative to using antifoam, as foam level with open pipe was significantly less. Both strategies successfully reduced dCO 2 level by 2.5‐fold (179 ± 9 vs 72 ± 9 mmHg). Titer at day 10 of culture improved by 1.5‐fold. Specific productivity improved by 41%. Historically, cultures were harvested around day 9–11 because of the high amount of foam; both strategies allowed the cultures to be extended up to day 14, resulting in 2‐fold higher titer compared to that of the historical control without compromising protein quality.

Overview

Integrity signals

Registry

Crossref · 10.1021/bp0256263

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Cited by

See all 113

Metadata

Authors
Mostafa, S. S., & Gu, X. (.
Affiliations
Eli Lilly (United States) (US)
Corresponding author
Mostafa, Sigma S.
Venue
Biotechnology Progress
Publisher
Wiley
Published
2003-01
Volume
19
Issue
1
Pages
45-51
ISSN
  • 1520-6033 (ISSN-L)
  • 8756-7938
OpenAlex
W2087058811
Cited by
113
References
12
Citations by year
2026: 2 · 2025: 5 · 2024: 4 · 2023: 3 · 2022: 3 · 2021: 2 · 2020: 4 · 2019: 7 · 2018: 10 · 2017: 2 · 2016: 5 · 2015: 6 · 2014: 12 · 2013: 5 · 2012: 1
FWCI
1.84
Type
journal article
Language
en
Open access
closed
Locations
  • Biotechnology Progress (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Viral Infectious Diseases and Gene Expression in Insects
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
Keywords
fed-batch fermentation, bioreactor scale-up, sparging, impeller position, air flow rate, bicarbonate concentration, antifoam, foam control, specific productivity, mass transfer coefficient, agitator speed, bubble size, bioprocess optimization
MeSH terms
Carbon Dioxide, Cell-Free System, Computer Simulation, Feasibility Studies, Hydrogen-Ion Concentration, Models, Biological, Models, Chemical, Pilot Projects, Quality Control, Rheology, Sodium Bicarbonate, Cell Culture Techniques, Bioreactors

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.