Orientation and Mg Incorporation of Calcite Grown on Functionalized Self-Assembled Monolayers: A Synchrotron X-ray Study
The DOI matches its Crossref record.
Abstract
Calcite crystals were nucleated from MgCl 2 /CaCl 2 solutions onto functionalized self-assembled monolayers adsorbed onto E-beam evaporated Au films. Synchrotron X-ray scattering studies of the crystals reveal new information about preferred orientation and Mg incorporation. The Au [111] axis is distributed within 2.6° of the film surface normal, but the oriented crystals may be tilted up to 6° away from this axis. For low Mg 2+ content, SO 3 - -functionalized films nucleated primarily near the (106) calcite face, odd-chain-length carboxylic acid terminated alkanethiol films nucleated near the (012) face, and even-chain-length carboxylic acid terminated alkanethiol films nucleated near the (113) face. [Mg 2+ ]/[Ca 2+ ] concentration ratios ( n ) of 2 and greater defeated this preferred orientation and created a powder texture. Diffraction patterns within the layer plane from the coarse calcite powders indicated a shift to higher 2θ accompanied by peak broadening with increasing n . For 0.5 < n < 3.5, a double set of calcite peaks is observed, showing that two distinct Mg calcite phases form: one of comparatively lower Mg content, derived from the templated crystals, and a Mg-rich phase derived from amorphous precursor particles. According to the refinement of lattice parameters, Mg incorporation of up to 18 mol % occurs for n = 4, independent of film functionality. We discuss the differences between the differently functionalized monolayers and also introduce the hypothesis that two separate routes to Mg calcite formation occur in this system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Controlling Mineral Morphologies and Structures in Biological and Synthetic Systems
Meldrum, F. C., & Cölfen, H. (2008) · Chemical Reviews · doi:10.1021/cr8002856 · Cited by 1,397
Gower, L. B. (2008) · Chemical Reviews · doi:10.1021/cr800443h · Cited by 1,086
Biomimetic CaCO3 Mineralization using Designer Molecules and Interfaces
Sommerdijk, N. A. J. M., & With, G. D. (2008) · Chemical Reviews · doi:10.1021/cr078259o · Cited by 446
Microbially catalyzed dolomite formation: From near-surface to burial
Petrash, D. A., Bialik, O. M., Bontognali, T. R. R., Vasconcelos, C., Roberts, J. A., McKenzie, J. A., & Konhauser, K. O. (2017) · Earth-Science Reviews · doi:10.1016/j.earscirev.2017.06.015 · Cited by 338
Langmuir monolayers as models to study processes at membrane surfaces
Stefaniu, C., Brezesinski, G., & Möhwald, H. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.02.013 · Cited by 274
Metadata
- Authors
- Kwak, S.-Y., DiMasi, E., Han, Y.-J., Aizenberg, J., & Kuzmenko, I.
- Venue
- Crystal Growth & Design
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-07-27
- Volume
- 5
- Issue
- 6
- Pages
- 2139-2145
- ISSN
- 1528-7483 (ISSN-L)
- 1528-7505
- OpenAlex
- W1975997826
- Cited by
- 33
- References
- 0
- FWCI
- 1.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Orientation and Mg Incorporation of Calcite Grown on Functionalized Self-Assembled Monolayers: A Synchrotron X-ray Study. https://app.cochat.ai/papers/10.1021/cg050164x
- The paper
- Kwak, S.-Y., DiMasi, E., Han, Y.-J., Aizenberg, J., & Kuzmenko, I. (2005). Orientation and Mg Incorporation of Calcite Grown on Functionalized Self-Assembled Monolayers: A Synchrotron X-ray Study. Crystal Growth & Design. https://doi.org/10.1021/cg050164x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.