The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Fire Properties of Polystyrene−Clay Nanocomposites
Abstract
Polystyrene−clay nanocomposites have been prepared using a bulk polymerization technique. Three new “onium” salts have been used to prepare the nanocomposites, two are functionalized ammonium salts while the third is a phosphonium salt. By TGA/FTIR, both ammonium and phosphonium treatments have been shown to degrade by a Hofmann elimination mechanism at elevated temperatures. TGA/FTIR showed that the phosphonium treatment is the most thermally stable treatment when compared to the two ammonium salts. The nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, strength and elongation at break, as a measure of the mechanical properties, thermogravimetric analysis, and cone calorimetry. The onset temperature of the degradation is increased by about 50 °C and the peak heat release rate is reduced by 27−58%, depending upon the amount of clay that is present. The mass loss rates are also significantly reduced in the presence of the clay.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Gilman, J. W., Jackson, C. L., Morgan, A. B., Harris, R. H. J., Manias, E., Giannelis, E. P., Wuthenow, M., Hilton, D., & Phillips, S. H. (2000) · Chemistry of Materials · doi:10.1021/cm0001760 · Cited by 1,498
Self-citationAkelah, A., & Moet, A. (1996) · Journal of Materials Science · doi:10.1007/bf00360767 · Cited by 254
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Nanoparticle networks reduce the flammability of polymer nanocomposites
Kashiwagi, T., Du, F., Douglas, J. F., Winey, K. I., Harris, R. H., & Shields, J. R. (2005) · Nature Materials · doi:10.1038/nmat1502 · Cited by 996
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Fire Properties of Polymer Composite Materials
(2006) · Solid Mechanics and Its Applications · doi:10.1007/978-1-4020-5356-6 · Cited by 606
Kashiwagi, T., Du, F., Winey, K. I., Groth, K. M., Shields, J. R., Bellayer, S. P., Kim, H., & Douglas, J. F. (2005) · Polymer · doi:10.1016/j.polymer.2004.10.087 · Cited by 419
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites
Zhu, J., Wei, S., Ryu, J., Budhathoki, M., Liang, G., & Guo, Z. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00063a · Cited by 339
Self-citation2D boron nitride nanosheets for polymer composite materials
Rasul, M. G., Kiziltas, A., Arfaei, B., & Shahbazian-Yassar, R. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00231-2 · Cited by 332
Polymer/montmorillonite nanocomposites with improved thermal properties
Leszczyńska, A., Njuguna, J., Pielichowski, K., & Banerjee, J. R. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2006.11.003 · Cited by 315
Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica
Liu, Y.-L., Hsu, C.-Y., Wei, W.-L., & Jeng, R.-J. (2003) · Polymer · doi:10.1016/s0032-3861(03)00519-6 · Cited by 266
Studies on poly(vinylidene fluoride)–clay nanocomposites: Effect of different clay modifiers
Patro, T. U., Mhalgi, M. V., Khakhar, D. V., & Misra, A. (2008) · Polymer · doi:10.1016/j.polymer.2008.05.034 · Cited by 259
Synthetic Biodegradable Aliphatic Polyester/Montmorillonite Nanocomposites
Lim, S. T., Hyun, Y. H., Choi, H. J., & Jhon, M. S. (2002) · Chemistry of Materials · doi:10.1021/cm010377j · Cited by 254
Ma, H., Tong, L., Xu, Z., & Fang, Z. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700677 · Cited by 252
The effect of clay on the thermal degradation of polyamide 6 in polyamide 6/clay nanocomposites
Jang, B. N., & Wilkie, C. A. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.078 · Cited by 153
Self-citation
Metadata
- Authors
- Zhu, J., Morgan, A. B., Lamelas, F. J., & Wilkie, C. A.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-04-28
- Volume
- 13
- Issue
- 10
- Pages
- 3774-3780
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1975329767
- Cited by
- 603
- References
- 4
- FWCI
- 31.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.