The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Polypropylene/Montmorillonite Nanocomposites. Review of the Synthetic Routes and Materials Properties
Abstract
The synthetic routes and materials properties of polypropylene/montmorillonite nanocomposites are reviewed. The nanocomposite formation is achieved in two ways: either by using functionalized polypropylenes and common organo-montmorillonites, or by using neat/unmodified polypropylene and a semi-fluorinated organic modification for the silicates. All the hybrids can be formed by solventless melt-intercalation or extrusion, and the resulting polymer/inorganic structures are characterized by a coexistence of intercalated and exfoliated montmorillonite layers. Small additions typically less than 6 wt % of these nanoscale inorganic fillers promote concurrently several of the polypropylene materials properties, including improved tensile characteristics, higher heat deflection temperature, retained optical clarity, high barrier properties, better scratch resistance, and increased flame retardancy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Gilman, J. W., Jackson, C. L., Morgan, A. B., Harris, R. H. J., Manias, E., Giannelis, E. P., Wuthenow, M., Hilton, D., & Phillips, S. H. (2000) · Chemistry of Materials · doi:10.1021/cm0001760 · Cited by 1,498
Self-citationPreparation and Mechanical Properties of Polypropylene−Clay Hybrids
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,386
Mortland, M. M. (1975) · Soil Science Society of America Journal · doi:10.2136/sssaj1975.03615995003900020002x · Cited by 1,154
Vaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Structure and Properties of Poly(vinyl alcohol)/Na+ Montmorillonite Nanocomposites
Strawhecker, K. E., & Manias, E. (2000) · Chemistry of Materials · doi:10.1021/cm000506g · Cited by 790
Self-citationFormation and Properties of Clay-Polymer Complexes
(2012) · Developments in Clay Science · doi:10.1016/c2009-0-01833-9 · Cited by 767
Hasegawa, N., Kawasumi, M., Kato, M., Usuki, A., & Okada, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980103)67:1<87::aid-app10>3.0.co;2-2 · Cited by 662
Polypropylene Structure, blends and composites
Karger-Kocsis, J. (1995) · Springer eBooks · doi:10.1007/978-94-011-0521-7 · Cited by 631
Vaia, R. A., Vasudevan, S., Krawiec, W., Scanlon, L. G., & Giannelis, E. P. (1995) · Advanced Materials · doi:10.1002/adma.19950070210 · Cited by 626
Cited by
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Structural and mechanical properties of polymer nanocomposites
Tjong, S. C. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.06.001 · Cited by 1,531
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Schaefer, D. W., & Justice, R. S. (2007) · Macromolecules · doi:10.1021/ma070356w · Cited by 789
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Nanoscale particles for polymer degradation and stabilization—Trends and future perspectives
Kumar, A. P., Depan, D., Singh Tomer, N., & Singh, R. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.002 · Cited by 680
Epoxy clay nanocomposites – processing, properties and applications: A review
Azeez, A. A., Rhee, K. Y., Park, S. J., & Hui, D. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.012 · Cited by 660
Nanocomposites: Structure, Phase Behavior, and Properties
Kumar, S. K., & Krishnamoorti, R. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100856 · Cited by 514
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Preparation and characterization of graphite nanosheets from ultrasonic powdering technique
Chen, G., Weng, W., Wu, D., Wu, C., Lu, J., Wang, P., & Chen, X. (2004) · Carbon · doi:10.1016/j.carbon.2003.12.074 · Cited by 434
Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries
Zhang, H., Zhao, H., Khan, M. A., Zou, W., Xu, J., Zhang, L., & Zhang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05336g · Cited by 416
Patel, H. A., Somani, R. S., Bajaj, H. C., & Jasra, R. V. (2006) · Bulletin of Materials Science · doi:10.1007/bf02704606 · Cited by 379
Emerging biodegradable materials: starch- and protein-based bio-nanocomposites
Zhao, R., Torley, P., & Halley, P. J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2434-8 · Cited by 376
Polymer Layered Silicate Nanocomposites: A Review
Mittal, V. (2009) · Materials · doi:10.3390/ma2030992 · Cited by 344
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Polymer micro and nanocomposites: Structure, interactions, properties
Móczó, J., & Pukánszky, B. (2008) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2008.06.011 · Cited by 314
Gas barrier properties of polymer/clay nanocomposites
Cui, Y., Kumar, S., Rao Kona, B., & van Houcke, D. (2015) · RSC Advances · doi:10.1039/c5ra10333a · Cited by 308
Heinz, H., Vaia, R. A., Krishnamoorti, R., & Farmer, B. L. (2007) · Chemistry of Materials · doi:10.1021/cm062019s · Cited by 273
Mechanical milling as a technology to produce structural and functional bio-nanocomposites
Gorrasi, G., & Sorrentino, A. (2015) · Green Chemistry · doi:10.1039/c5gc00029g · Cited by 260
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Crystallinity and Chain Conformation in PEO/Layered Silicate Nanocomposites
Chrissopoulou, K., Andrikopoulos, K. S., Fotiadou, S., Bollas, S., Karageorgaki, C., Christofilos, D., Voyiatzis, G. A., & Anastasiadis, S. H. (2011) · Macromolecules · doi:10.1021/ma201711r · Cited by 134
Pulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911243a · Cited by 133
Zhu, J., Wen, K., Wang, Y., Ma, L., Su, X., Zhu, R., Xi, Y., & He, H. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.02.007 · Cited by 31
Dimitry, O. I. H., Abdeen, Z., Ismail, E. A., & Saad, A. L. G. (2011) · International Journal of Green Nanotechnology · doi:10.1080/19430892.2011.628585 · Cited by 17
Metadata
- Authors
- Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., & Chung, T. C.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-09-07
- Volume
- 13
- Issue
- 10
- Pages
- 3516-3523
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2037750303
- Cited by
- 903
- References
- 16
- FWCI
- 34.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.