The DOI matches its Crossref record.
Polymer-Encapsulated Carbon Nanotubes Prepared through Ultrasonically Initiated In Situ Emulsion Polymerization
Abstract
In this study, a novel ultrasonically initiated in situ emulsion polymerization approach was used to modify multi-walled carbon nanotubes (MWCNTs). The dispersion behavior of MWCNTs in aqueous solution under ultrasonic irradiation was investigated by spectrophotometry. Ultrasonically initiated emulsion polymerization of monomer n -butyl acrylate (BA) and methyl methacrylate (MMA) are reported. By employing the multiple effects of ultrasound, i.e., dispersion, pulverizing, activation, and initiation, the aggregation and entanglement of carbon nanotubes in aqueous solution can be broken down, while in situ polymerization of monomer BA or MMA on the surface of MWCNTs proceeds without any added chemical initiator; consequently, the MWCNTs are coated by the formed polymer. Transmission electron microscopy confirms that after surface modification through ultrasonically initiated in-situ polymerization, the size of MWCNTs increased; even after 72 h of Soxhlet extraction with boiling acetone there are still unextracted polymers in the modified MWCNTs, indicating strong interaction between the polymer and carbon nanotubes. The results of thermogravimetric analysis show that there are high encapsulation rates for PBA. The characteristic peak of C O in carbonyl groups at ∼1733 cm - 1 still appears in the Fourier transform infrared spectrum of the extracted polymer-encapsulated MWCNTs. X-ray photoelectron spectroscopy further confirms the presence of polymer-encapsulated MWCNTs and strong interaction between polymer and MWCNTs. Therefore, ultrasonically initiated in situ emulsion polymerization provides a novel surface modification method for carbon nanotubes. The polymer-encapsulated carbon nanotubes can be well dispersed in Nylon 6 matrix. The interface adhesion between polymer-encapsulated carbon nanotubes and Nylon 6 is improved. The yield strength is improved ∼30% and the Young's modulus is improved ∼35% at only 1 wt % content of polymer-encapsulated carbon nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Polymer nanocomposites based on functionalized carbon nanotubes
Sahoo, N. G., Rana, S., Cho, J. W., Li, L., & Chan, S. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.002 · Cited by 1,670
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
Metadata
- Authors
- Xia, H., Wang, Q., & Qiu, G.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-09-05
- Volume
- 15
- Issue
- 20
- Pages
- 3879-3886
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1984833639
- Cited by
- 230
- References
- 0
- FWCI
- 7.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymer-Encapsulated Carbon Nanotubes Prepared through Ultrasonically Initiated In Situ Emulsion Polymerization. https://app.cochat.ai/papers/10.1021/cm0341890
- The paper
- Xia, H., Wang, Q., & Qiu, G. (2003). Polymer-Encapsulated Carbon Nanotubes Prepared through Ultrasonically Initiated In Situ Emulsion Polymerization. Chemistry of Materials. https://doi.org/10.1021/cm0341890
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.