The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Photovoltaic Properties of Dye Functionalized Single-Wall Carbon Nanotube/Conjugated Polymer Devices
Abstract
Photovoltaic properties of dye, N -(1-pyrenyl)maleimide (PM), functionalized single-walled carbon nanotubes (SWNT)−conjugated polymer, poly(3-octylthiophene) (P3OT), blend composites are reported. Devices were fabricated by drop or spin cast from the solution of composite onto ITO-coated glass. Improved performance was achieved by functionalizing the SWNT with dye molecules. Photovoltaic behavior with an open circuit voltage of 0.6−0.7 V was measured in diodes (Al/SWNT+PM−polymer/ITO). The short circuit current was found to increase by more than an order of magnitude compared to the SWNT−polymer diode without dye. Optical absorption spectra showed considerable ground-state interaction between SWNT+dye and the polymer. It is proposed that the main reason for the increase in short circuit current is due to efficient transfer of holes by dye molecules to P3OT at the dye/polymer interface and the rapid transfer of the generated electrons to the SWNTs at the dye/nanotube interface. It is shown that the dye functionalized SWNT−conjugated polymer composites represent an alternative class of organic semiconducting materials for dye-based organic photovoltaic cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization
Chen, R. J., Zhang, Y., Wang, D., & Dai, H. (2001) · Journal of the American Chemical Society · doi:10.1021/ja010172b · Cited by 2,534
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Carbon-nanotube photonics and optoelectronics
Avouris, P., Freitag, M., & Perebeinos, V. (2008) · Nature Photonics · doi:10.1038/nphoton.2008.94 · Cited by 1,199
Potential Applications of Carbon Nanotubes
Endo, M., Strano, M. S., & Ajayan, P. M. (2007) · Topics in Applied Physics · doi:10.1007/978-3-540-72865-8_2 · Cited by 481
Campidelli, S., Ballesteros, B., Filoramo, A., Díaz, D. D., de la Torre, G., Torres, T., Rahman, G. M. A., Ehli, C., Kiessling, D., Werner, F., et al. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8033262 · Cited by 311
Electrical properties of single-wall carbon nanotube-polymer composite films
Kymakis, E., & Amaratunga, G. A. J. (2006) · Journal of Applied Physics · doi:10.1063/1.2189931 · Cited by 272
Self-citationBallesteros, B., de la Torre, G., Ehli, C., Aminur Rahman, G. M., Agulló-Rueda, F., Guldi, D. M., & Torres, T. (2007) · Journal of the American Chemical Society · doi:10.1021/ja068240n · Cited by 258
Elaboration of P3HT/CNT/PCBM Composites for Organic Photovoltaic Cells
Berson, S., de Bettignies, R., Bailly, S., Guillerez, S., & Jousselme, B. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700438 · Cited by 253
Metadata
- Authors
- Bhattacharyya, S., Kymakis, E., & Amaratunga, G. A. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-02
- Volume
- 16
- Issue
- 23
- Pages
- 4819-4823
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2135220265
- Cited by
- 185
- References
- 1
- FWCI
- 15.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.