The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Pore-Wall Chemistry and Photocatalytic Activity of Mesoporous Titania Molecular Sieve Films
Abstract
Transparent zeolite-like mesoporous TiO 2 nanocrystalline thin films with high photocatalytic activity were synthesized via a surfactant-templated method. The films were characterized by TGA−DTA, XRD, nitrogen adsorption, SEM, TEM, UV/vis, and FT-IR spectroscopy. The photocatalytic activity of the films was evaluated by photodecomposition of acetone in air at ambient conditions. It was found that thermal treatment resulted in surfactant elimination, framework solidification, as well as pore-wall crystallization of the mesoporous TiO 2 . The resulting zeolite-like mesoporous TiO 2 nanocrystalline films had large specific surface areas (∼100 m 2 /g), high porosity (∼40%), extended band gap energy (∼3.3 eV), tri-directional communicating pore systems, and enhanced photocatalytic activity. The optimum calcination temperature was found to be 500 °C, at which the film possessed a cubic ordered mesoporous structure and exhibited the highest photocatalytic activity. A comparison with a conventional TiO 2 film (prepared from a sol−gel method) showed that the ordered mesoporous TiO 2 nanocrystalline film (calcined at 500 °C) had over 2 times the specific photocatalytic activity as the conventional film. The high photocatalytic activity of zeolite-like mesoporous TiO 2 thin films can be explained by the large specific surface area and the three-dimensionally connected mesoporous architecture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spectrometric Identification of Organic Compounds
Silverstein, R. M., & Bassler, G. C. (1962) · Journal of Chemical Education · doi:10.1021/ed039p546 · Cited by 14,272
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Catalytic nanoarchitectures—The importance of nothing and the unimportance of periodicity
Rolison, D. R. (2003) · Science · doi:10.1126/science.1082332 · Cited by 1,037
Cited by
Development of alternative photocatalysts to TiO2: Challenges and opportunities
Hernández-Alonso, M. D., Fresno, F., Suárez, S., & Coronado, J. M. (2009) · Energy & Environmental Science · doi:10.1039/b907933e · Cited by 1,278
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
Freestanding Tin Disulfide Single‐Layers Realizing Efficient Visible‐Light Water Splitting
Sun, Y., Cheng, H., Gao, S., Sun, Z., Liu, Q., Liu, Q., Lei, F., Yao, T., He, J., Wei, S., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204675 · Cited by 612
Photocatalysis fundamentals and surface modification of TiO2 nanomaterials
Wen, J., Li, X., Liu, W., Fang, Y., Xie, J., & Xu, Y. (2015) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(15)60999-8 · Cited by 552
Hu, X., Li, G., & Yu, J. C. (2010) · Langmuir · doi:10.1021/la902142b · Cited by 534
Self-citation
Metadata
- Authors
- Yu, J. C., Wang, X., & Fu, X.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-03-12
- Volume
- 16
- Issue
- 8
- Pages
- 1523-1530
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2055636478
- Cited by
- 256
- References
- 4
- FWCI
- 12.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.