The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
PbS/Polymer Nanocomposite Optical Materials with High Refractive Index
Abstract
High refractive index nano-PbS/polymer composites were fabricated from reactive lead-containing precursors and polythiourethane (PTU) oligomer terminated with isocyanate group, followed by in situ gas/solid reaction. The lead-containing precursor with a chemical formula of Pb(SCH 2 CH 2 OH) 2 was synthesized in water phase at pH = 5−9 and exhibited an absorption at 317 nm in dimethyl sulfoxide (DMSO) in UV−vis spectra. PbS nanoparticles can be formed in DMSO after treatment with H 2 S. TEM studies indicated that the PbS nanoparticles were smaller than 10 nm and aggregated seriously in DMSO. After the precursors were incorporated into PTU oligomer, the obtained composite films were treated with H 2 S to obtain PbS nanoparticles/PTU nanocomposite films. TEM showed that the nanocomposites exhibited interesting phase behaviors depending on the precursor content in films. A uniform spherical aggregate of PbS nanoparticles (nanospheres) with a size smaller than 100 nm formed in the nanocomposite films below 26.3 wt % of lead-containing precursors. When the precursor content was larger than 59.3 wt %, the PbS nanoparticles about 3 nm dispersed uniformly in the whole polymer matrix. Ellipsometric measurement indicated that the precursors/PTU composite films before being treated with H 2 S had a refractive index in the range 1.57−1.665 and after reaction with H 2 S, the obtained PbS/PTU nanocomposite films had a higher refractive index in the range 1.57−2.06 with the varied content of precursors from 0 to 67 wt %.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perspectives on the Physical Chemistry of Semiconductor Nanocrystals
Alivisatos, A. P. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9535506 · Cited by 3,595
Cited by
Kango, S., Kalia, S., Celli, A., Njuguna, J., Habibi, Y., & Kumar, R. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.003 · Cited by 2,157
Polymer-Nanoparticle Composites: From Synthesis to Modern Applications
Hanemann, T., & Szabó, D. V. (2010) · Materials · doi:10.3390/ma3063468 · Cited by 815
High refractive index polymers: fundamental research and practical applications
Liu, J.-G., & Ueda, M. (2009) · Journal of Materials Chemistry · doi:10.1039/b909690f · Cited by 625
Nanocomposites of polymer and inorganic nanoparticles for optical and magnetic applications
Li, S., Meng Lin, M., Toprak, M. S., Kim, D. K., & Muhammed, M. (2010) · Nano Reviews · doi:10.3402/nano.v1i0.5214 · Cited by 479
Infrared‐Emitting Colloidal Nanocrystals: Synthesis, Assembly, Spectroscopy, and Applications
Rogach, A. L., Eychmüller, A., Hickey, S. G., & Kershaw, S. V. (2007) · Small · doi:10.1002/smll.200600625 · Cited by 403
Metadata
- Authors
- Lü, C., Guan, C., Liu, Y., Cheng, Y., & Yang, B.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-09
- Volume
- 17
- Issue
- 9
- Pages
- 2448-2454
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2062815360
- Cited by
- 175
- References
- 1
- FWCI
- 8.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.