The DOI matches its Crossref record.
Characterization of Electrospun PVdF Fiber-Based Polymer Electrolytes
Abstract
Porous PVdF fiber-based membranes with a three-dimensional network structure, high porosity, large electrolyte solution uptake, and adequate mechanical properties were prepared by an electrospinning technique using various mixed-solvent compositions with poly(vinylidene fluoride) (PVdF). Their physical properties, including surface morphology, average fiber diameter, pore size, and electrolyte solution uptake, strongly depended on the composition of the polymer solution used for electrospinning. From X-ray diffraction and FT-Raman data, we found the PVdF membranes to have mixed-crystal structure sof Form II (α-type) and Form III (γ-type). Electrospun PVdF fiber-based polymer electrolytes were prepared by immersing porous PVdF membranes into 1 M LiPF 6 electrolyte solutions. On the basis of FT-Raman data of the PVdF fiber-based polymer electrolytes, it was shown that ethylene carbonate molecules mainly participated in the solvation of the lithium salt. Moreover, with the exception of diethyl carbonate, these aliphatic carbonate molecules strongly interacted with the PVdF chain. The polymer electrolytes exhibited high ionic conductivities up to 1.0 × 10 - 3 S/cm at room temperature, and wide electrochemical stability windows of 0.0 to 4.5 V vs Li/Li + . The ionic conductivity of the PVdF fiber-based polymer electrolytes depended on the physicochemical properties of the 1 M LiPF 6 electrolyte solution inside the pores, whereas their electrochemical properties were enhanced by the interaction between the PVdF chain and the aliphatic carbonate molecules. Thus, prototype cells with PVdF fiber-based polymer electrolytes showed a range of different charge/discharge properties according to the solvent composition of the 1 M LiPF 6 electrolyte solutions and the C-rate. In addition, the cycling performances depended on the electrochemical and spectroscopic properties of the electrospun PVdF fiber-based polymer electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A critical analysis of the α, β and γ phases in poly(vinylidene fluoride) using FTIR
Cai, X., Lei, T., Sun, D., & Lin, L. (2017) · RSC Advances · doi:10.1039/c7ra01267e · Cited by 1,788
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Properties and Applications of the β Phase Poly(vinylidene fluoride)
Ruan, L., Yao, X., Chang, Y., Zhou, L., Qin, G., & Zhang, X. (2018) · Polymers · doi:10.3390/polym10030228 · Cited by 824
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Self-citationArising applications of ferroelectric materials in photovoltaic devices
Yuan, Y., Xiao, Z., Yang, B., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14188h · Cited by 507
He, Z., Rault, F., Lewandowski, M., Mohsenzadeh, E., & Salaün, F. (2021) · Polymers · doi:10.3390/polym13020174 · Cited by 425
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Costa, C. M., Silva, M. M., & Lanceros-Méndez, S. (2013) · RSC Advances · doi:10.1039/c3ra40732b · Cited by 330
A flexible piezoelectric force sensor based on PVDF fabrics
Wang, Y. R., Zheng, J. M., Ren, G. Y., Zhang, P. H., & Xu, C. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/4/045009 · Cited by 320
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Development of electrospun PVdF–PAN membrane-based polymer electrolytes for lithium batteries
GOPALAN, A., SANTHOSH, P., MANESH, K., NHO, J., KIM, S., HWANG, C., & LEE, K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.08.047 · Cited by 297
Lee, J. S., Shin, K.-Y., Cheong, O. J., Kim, J. H., & Jang, J. (2015) · Scientific Reports · doi:10.1038/srep07887 · Cited by 199
Self-citation
Metadata
- Authors
- Choi, S. W., Kim, J. R., Ahn, Y. R., Jo, S. M., & Cairns, E. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-12-05
- Volume
- 19
- Issue
- 1
- Pages
- 104-115
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2025123555
- Cited by
- 197
- References
- 0
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.