The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Layer-by-Layer Deposition of Poly(diallyldimethylammonium chloride) and Sodium Silicate Multilayers on Silica-Sphere-Coated Substrate—Facile Method to Prepare a Superhydrophobic Surface
Abstract
A facile method for preparing a superhydrophobic surface was developed by layer-by-layer (LbL) deposition of poly(diallyldimethylammonium chloride) (PDDA)/sodium silicate multilayer films on a silica-sphere-coated substrate followed with a fluorination treatment. First, a silica-sphere-coated substrate that contains loosely stacked silica spheres of 600 and 220 nm was prepared and cross-linked with SiCl 4 . PDDA was then alternately assembled with sodium silicate on the silica-sphere-coated surface to prepare a micro- and nanostructured hierarchical surface. Scanning electron microscopy (SEM) images verify that the deposition of a 5-bilayer PDDA/sodium silicate multilayer film leads to the formation of a micro- and nanostructured hierarchical surface. After chemical vapor deposition of a layer of fluoroalkylsilane, a superhydrophobic surface with a water contact angle of 157.1° and sliding angle of 3.1° was successfully fabricated. The easy availability of the materials and simplicity of this method might make the superhydrophobic surface potentially useful in a variety of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
Progess in superhydrophobic surface development
Roach, P., Shirtcliffe, N. J., & Newton, M. I. (2008) · Soft Matter · doi:10.1039/b712575p · Cited by 1,615
Superhydrophobic surfaces: From natural to biomimetic to functional
Guo, Z., Liu, W., & Su, B.-L. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.08.047 · Cited by 974
Multiple Functionalities of Polyelectrolyte Multilayer Films: New Biomedical Applications
Boudou, T., Crouzier, T., Ren, K., Blin, G., & Picart, C. (2010) · Advanced Materials · doi:10.1002/adma.200901327 · Cited by 736
A review on self-cleaning coatings
Ganesh, V. A., Raut, H. K., Nair, A. S., & Ramakrishna, S. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12523k · Cited by 725
Recent advances in designing superhydrophobic surfaces
Celia, E., Darmanin, T., Taffin de Givenchy, E., Amigoni, S., & Guittard, F. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.03.041 · Cited by 711
A review on ‘self-cleaning and multifunctional materials’
Ragesh, P., Anand Ganesh, V., Nair, S. V., & Nair, A. S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02542c · Cited by 481
Wang, C., Yao, T., Wu, J., Ma, C., Fan, Z., Wang, Z., Cheng, Y., Lin, Q., & Yang, B. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900520z · Cited by 362
Rational design of materials interface at nanoscale towards intelligent oil–water separation
Ge, M., Cao, C., Huang, J., Zhang, X., Tang, Y., Zhou, X., Zhang, K., Chen, Z., & Lai, Y. (2018) · Nanoscale Horizons · doi:10.1039/c7nh00185a · Cited by 311
Towards Understanding Why a Superhydrophobic Coating Is Needed by Water Striders
Shi, F., Niu, J., Liu, J., Liu, F., Wang, Z., Feng, X. ‐., & Zhang, X. (2007) · Advanced Materials · doi:10.1002/adma.200700752 · Cited by 309
Roles of silanes and silicones in forming superhydrophobic and superoleophobic materials
Li, L., Li, B., Dong, J., & Zhang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05441b · Cited by 306
Layer-by-Layer Assembly for Graphene-Based Multilayer Nanocomposites: Synthesis and Applications
Lee, T., Min, S. H., Gu, M., Jung, Y. K., Lee, W., Lee, J. U., Seong, D. G., & Kim, B.-S. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00491 · Cited by 277
Metadata
- Authors
- Zhang, L., Chen, H., Sun, J., & Shen, J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-01-19
- Volume
- 19
- Issue
- 4
- Pages
- 948-953
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2084371932
- Cited by
- 171
- References
- 1
- FWCI
- 8.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.