The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Top-Down versus Bottom-Up Fabrication of Graphene-Based Electronics
Abstract
Graphene electronic devices can be made by top-down (TD) or bottom-up (BU) approaches. This Perspective defines and explains those two approaches and discusses the advantages and limitations of each, particularly in the context of graphene fabrication. It is further exemplified using graphene nanoribbons as the prototypical graphene structure that can be prepared using either a TD or BU approach. The TD approach is well-suited for placement of large arrays of devices on a chip using standard patterning tools. However, the TD approach severely compromises the edges of the graphene since present fabrication tools are coarse relative to the ∼0.1 nm definition of a C–C bond. The BU approach can afford exquisite control of the graphene edges; however, placing the structures, en mass, in the locations of interest is often impossible. Also, using the BU approach, it can be very difficult to make device structures long enough for integration with TD-derived probe electrodes. Specific examples are shown, along with an outlook for optimization of future graphene devices in order to capitalize upon the advantages of both TD and BU fabrication methodologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
Li, X., Cai, W., An, J., Kim, S., Nah, J., Yang, D., Piner, R., Velamakanni, A., Jung, I., Tutuc, E., et al. (2009) · Science · doi:10.1126/science.1171245 · Cited by 11,220
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K. S., Zhao, Y., Jang, H., Lee, S. Y., Kim, J. M., Kim, K. S., Ahn, J.-H., Kim, P., Choi, J.-Y., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,452
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Large Area, Few-Layer Graphene Films on Arbitrary Substrates by Chemical Vapor Deposition
Reina, A., Jia, X., Ho, J., Nezich, D., Son, H., Bulovic, V., Dresselhaus, M. S., & Kong, J. (2009) · Nano Letters · doi:10.1021/nl801827v · Cited by 5,881
Energy Band-Gap Engineering of Graphene Nanoribbons
Han, M. Y., Özyilmaz, B., Zhang, Y., & Kim, P. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.206805 · Cited by 5,207
Energy Gaps in Graphene Nanoribbons
Son, Y.-W., Cohen, M. L., & Louie, S. G. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.216803 · Cited by 5,080
Chemically Derived, Ultrasmooth Graphene Nanoribbon Semiconductors
Li, X., Wang, X., Zhang, L., Lee, S., & Dai, H. (2008) · Science · doi:10.1126/science.1150878 · Cited by 4,790
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Kumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Cheng, C., Li, S., Thomas, A., Kotov, N. A., & Haag, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00520 · Cited by 527
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Graphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
Metadata
- Authors
- Tour, J. M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-09-16
- Volume
- 26
- Issue
- 1
- Pages
- 163-171
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2332886591
- Cited by
- 262
- References
- 41
- FWCI
- 4.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Top-Down versus Bottom-Up Fabrication of Graphene-Based Electronics. https://app.cochat.ai/papers/10.1021/cm402179h
- The paper
- Tour, J. M. (2014). Top-Down versus Bottom-Up Fabrication of Graphene-Based Electronics. Chemistry of Materials. https://doi.org/10.1021/cm402179h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.