The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Direct Synthesis of Nitrogen-Doped Carbon Materials from Protic Ionic Liquids and Protic Salts: Structural and Physicochemical Correlations between Precursor and Carbon
Abstract
The traditional preparation of carbon materials requires specific polymer precursors and complex procedures. In this work, a series of easily prepared protic ionic liquids and salts (PILs/PSs) based on widely obtainable N-containing bases and acids were synthesized and explored as novel small-molecule precursors for preparing carbon materials via direct carbonization. Protonation enables nearly all N-containing compounds to be directly carbonized to carbon materials without the additional catalyst, tedious synthesis, vacuum system, and etching step that are often involved with conventional precursors. The correlations between the organic precursors and the properties of the carbon materials, in terms of yield, graphitization, N content, thermal stability against oxidation, and porosity, were systematically investigated. Based on the molecular tunability of PILs/PSs, it was possible to obtain task-specific carbon materials through ab initio design of the precursors at the molecular level. Importantly, highly porous N-doped carbons were obtained by one-step, template-free carbonization of certain PILs/PSs, and these carbon materials were found to exhibit high CO 2 uptake at room temperature and ambient pressure. Carbon materials obtained using this inexpensive strategy may find advanced applications in the fields of catalysis, energy, and environmental treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618
Mesoporous carbon materials: Synthesis and modification
Liang, C., Li, Z., & Dai, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702046 · Cited by 1,935
Shao, Y., Sui, J., Yin, G., & Gao, Y. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.09.047 · Cited by 763
Cited by
Liao, G., Gong, Y., Zhang, L., Gao, H., Yang, G.-J., & Fang, B. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00717b · Cited by 1,075
Ionic liquids and their solid-state analogues as materials for energy generation and storage
MacFarlane, D. R., Forsyth, M., Howlett, P. C., Kar, M., Passerini, S., Pringle, J. M., Ohno, H., Watanabe, M., Yan, F., Zheng, W., et al. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.5 · Cited by 666
Self-citationZhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
Self-citationIonic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Hierarchically porous and heteroatom doped carbon derived from tobacco rods for supercapacitors
Zhao, Y.-Q., Lu, M., Tao, P.-Y., Zhang, Y.-J., Gong, X.-T., Yang, Z., Zhang, G.-Q., & Li, H.-L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.020 · Cited by 579
Metadata
- Authors
- Zhang, S., Dokko, K., & Watanabe, M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-04-17
- Volume
- 26
- Issue
- 9
- Pages
- 2915-2926
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2323506199
- Cited by
- 165
- References
- 3
- FWCI
- 7.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.