The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ultrathin Atomic Layer Deposited TiO2 for Surface Passivation of Hydrothermally Grown 1D TiO2 Nanorod Arrays for Efficient Solid-State Perovskite Solar Cells
Abstract
In the current work, we studied the effect of the passivation of atomic layer deposited (ALD) ultrathin TiO 2 on hydrothermally grown one-dimensional (1D) TiO 2 nanorod (NR) arrays for solid-state perovskite-sensitized solar cells. Different thicknesses of ALD-passivated TiO 2 were deposited on the hydrothermally grown 1D TiO 2 NR samples. The ALD TiO 2 thickness was varied from 1 to 5 nm by variation of the growth cycle. Our controlled results revealed that the 4 nm thin-layer-passivated TiO 2 NR sample shows a power conversion efficiency (PCE) as high as η = 12.53% (without masking) for the CH 3 NH 3 PbI 3 perovskite absorbing layer. Our results revealed that the solar cell performance with different ALD passivation thicknesses strongly affects the open-circuit voltage ( V OC ) as well as the short-circuit current density ( J SC ). However, compared with high-temperature-processed standard device configurations based on TiCl 4 -treated mesoporous TiO 2 (mp-TiO 2 ) (∼10%) and TiCl 4 -treated TiO 2 NR (∼9%) perovskite solar cells, our low-temperature-processed, pinhole-free ALD-passivated devices exhibit higher PCEs. The 4 nm passivated sample exhibits η = 12.53 ± 0.35% with J SC = 19.23 ± 0.53 mA cm –2, fill factor (FF) = 0.70 ± 0.4, and V OC = 0.931 ± 0.01 V. By control of the ultrathin passivation layer thickness, our champion cell with 4.8 nm ALD passivated TiO 2 NRs demonstrated a PCE of 13.45% with J SC = 19.78 mA cm –2, V OC = 0.945 V, and FF = 0.72. These results further emphasize hydrothermally grown 1D TiO 2 and ALD-passivated electron transporting layers (ETLs) for efficient perovskite solar cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Metadata
- Authors
- Mali, S. S., Shim, C. S., Park, H. K., Heo, J., Patil, P. S., & Hong, C. K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-23
- Volume
- 27
- Issue
- 5
- Pages
- 1541-1551
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2321270117
- Cited by
- 182
- References
- 1
- FWCI
- 17.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.