The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Zintl Chemistry for Designing High Efficiency Thermoelectric Materials
Abstract
Zintl phases and related compounds are promising thermoelectric materials; for instance, high zT has been found in Yb 14 MnSb 11, clathrates, and the filled skutterudites. The rich solid-state chemistry of Zintl phases enables numerous possibilities for chemical substitutions and structural modifications that allow the fundamental transport parameters (carrier concentration, mobility, effective mass, and lattice thermal conductivity) to be modified for improved thermoelectric performance. For example, free carrier concentration is determined by the valence imbalance using Zintl chemistry, thereby enabling the rational optimization of zT . The low thermal conductivity values obtained in Zintl thermoelectrics arise from a diverse range of sources, including point defect scattering and the low velocity of optical phonon modes. Despite their complex structures and chemistry, the transport properties of many modern thermoelectrics can be understood using traditional models for heavily doped semiconductors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Self-citationCooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Self-citationEnhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Bulk nanostructured thermoelectric materials: current research and future prospects
Minnich, A. J., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2009) · Energy & Environmental Science · doi:10.1039/b822664b · Cited by 2,005
Effect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Cited by
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Self-citationRationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Compromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
3D charge and 2D phonon transports leading to high out-of-plane ZT in n-type SnSe crystals
Chang, C., Wu, M., He, D., Pei, Y., Wu, C.-F., Wu, X., Yu, H., Zhu, F., Wang, K., Chen, Y., et al. (2018) · Science · doi:10.1126/science.aaq1479 · Cited by 1,196
The panoscopic approach to high performance thermoelectrics
Zhao, L.-D., Dravid, V. P., & Kanatzidis, M. G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43099e · Cited by 997
High-performance nanostructured thermoelectric materials
Li, J.-F., Liu, W.-S., Zhao, L.-D., & Zhou, M. (2010) · NPG Asia Materials · doi:10.1038/asiamat.2010.138 · Cited by 963
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Phonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Self-citationThinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Self-citationHigh thermoelectric figure of merit in heavy hole dominated PbTe
Pei, Y., LaLonde, A., Iwanaga, S., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00456a · Cited by 784
Self-citationRecent advances in thermoelectric nanocomposites
Liu, W., Yan, X., Chen, G., & Ren, Z. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.10.001 · Cited by 735
BiCuSeO oxyselenides: new promising thermoelectric materials
Zhao, L.-D., He, J., Berardan, D., Lin, Y., Li, J.-F., Nan, C.-W., & Dragoe, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00997e · Cited by 722
Tamaki, H., Sato, H. K., & Kanno, T. (2016) · Advanced Materials · doi:10.1002/adma.201603955 · Cited by 592
Mao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Phonon-glass electron-crystal thermoelectric clathrates: Experiments and theory
Takabatake, T., Suekuni, K., Nakayama, T., & Kaneshita, E. (2014) · Reviews of Modern Physics · doi:10.1103/revmodphys.86.669 · Cited by 587
Manipulation of Phonon Transport in Thermoelectrics
Chen, Z., Zhang, X., & Pei, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705617 · Cited by 542
Recent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Weak electron–phonon coupling contributing to high thermoelectric performance in n-type PbSe
Wang, H., Pei, Y., LaLonde, A. D., & Snyder, G. J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1111419109 · Cited by 457
Self-citationNew Insights into Intrinsic Point Defects in V2VI3 Thermoelectric Materials
Zhu, T., Hu, L., Zhao, X., & He, J. (2016) · Advanced Science · doi:10.1002/advs.201600004 · Cited by 452
Reevaluation of PbTe1−xIx as high performance n-type thermoelectric material
LaLonde, A. D., Pei, Y., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01314a · Cited by 416
Self-citationEnhancement of the thermoelectric properties in nanoscale and nanostructured materials
Szczech, J. R., Higgins, J. M., & Jin, S. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02755c · Cited by 405
Measuring thermoelectric transport properties of materials
Borup, K. A., de Boor, J., Wang, H., Drymiotis, F., Gascoin, F., Shi, X., Chen, L., Fedorov, M. I., Müller, E., Iversen, B. B., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01320d · Cited by 380
Self-citationChalcopyrite CuGaTe2: A High‐Efficiency Bulk Thermoelectric Material
Plirdpring, T., Kurosaki, K., Kosuga, A., Day, T., Firdosy, S., Ravi, V., Snyder, G. J., Harnwunggmoung, A., Sugahara, T., Ohishi, Y., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200732 · Cited by 379
Self-citationRealising the potential of thermoelectric technology: a Roadmap
Freer, R., & Powell, A. V. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc05710b · Cited by 329
High‐Performance GeTe‐Based Thermoelectrics: from Materials to Devices
Liu, W., Wang, D., Liu, Q., Zhou, W., Shao, Z., & Chen, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000367 · Cited by 307
Nanoengineering thermoelectrics for 21st century: Energy harvesting and other trends in the field
Martín-González, M., Caballero-Calero, O., & Díaz-Chao, P. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.008 · Cited by 291
Designing high-performance layered thermoelectric materials through orbital engineering
Zhang, J., Song, L., Madsen, G. K. H., Fischer, K. F. F., Zhang, W., Shi, X., & Iversen, B. B. (2016) · Nature Communications · doi:10.1038/ncomms10892 · Cited by 290
Material descriptors for predicting thermoelectric performance
Yan, J., Gorai, P., Ortiz, B., Miller, S., Barnett, S. A., Mason, T., Stevanović, V., & Toberer, E. S. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03157a · Cited by 282
Self-citationIntrinsic Rattler-Induced Low Thermal Conductivity in Zintl Type TlInTe2
Jana, M. K., Pal, K., Warankar, A., Mandal, P., Waghmare, U. V., & Biswas, K. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01434 · Cited by 276
Zhang, Y., Skoug, E., Cain, J., Ozoliņš, V., Morelli, D., & Wolverton, C. (2012) · Physical Review B · doi:10.1103/physrevb.85.054306 · Cited by 265
Metadata
- Authors
- Toberer, E. S., May, A. F., & Snyder, G. J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-09
- Volume
- 22
- Issue
- 3
- Pages
- 624-634
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2071265202
- Cited by
- 683
- References
- 33
- FWCI
- 14.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.