The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly Conducting Nanosized Monodispersed Antimony-Doped Tin Oxide Particles Synthesized via Nonaqueous Sol−Gel Procedure
Abstract
Conducting antimony-doped tin oxide (ATO) nanoparticles are prepared by a nonaqueous solution route, using benzyl alcohol as both the oxygen source and the solvent, and tin tetrachloride and various Sb(III) and Sb(V) compounds as tin and antimony sources, respectively. This reaction produces nonagglomerated crystalline particles 3−4 nm in size, which can be easily redispersed in high concentrations in a variety of solvents to form stable transparent colloidal solutions without any stabilizing agents. The synthesis temperature is the most important processing parameter largely governing the reaction course and the particle properties, while the nature of the antimony source has only a marginal influence. The cassiterite SnO 2 lattice can accommodate up to 30 mol % antimony without significant changes in the structure. The incorporation of an increasing percentage of antimony causes a continuous decrease in particle size and a slight asymmetric lattice distortion. The introduction of an antimony dopant dramatically increases the particle conductivity, which reaches a maximum for 4% antimony, being more than 2 orders of magnitude higher than that of the pristine SnO 2 nanoparticles. The obtained conductivity of 1 × 10 −4 S/cm is the highest ever reported for the nonannealed nanosized ATO particles. Annealing in air at 500 °C further improves the conductivity to 2 × 10 2 S/cm, because of the particle sintering. Exceptionally high conductivity, small size, narrow size distribution, and dispersibility in various organic solvents make the ATO nanoparticles excellent primary building units for assembling nanostructured transparent conducting oxide materials with defined porous architectures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ba, J., Polleux, J., Antonietti, M., & Niederberger, M. (2005) · Advanced Materials · doi:10.1002/adma.200501018 · Cited by 271
Self-citation
Cited by
Reier, T., Nong, H. N., Teschner, D., Schlögl, R., & Strasser, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601275 · Cited by 1,253
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Synthesis of aerogels: from molecular routes to 3-dimensional nanoparticle assembly
Rechberger, F., & Niederberger, M. (2017) · Nanoscale Horizons · doi:10.1039/c6nh00077k · Cited by 148
Self-citationNiobium- and antimony-doped tin dioxide aerogels as new catalyst supports for PEM fuel cells
Ozouf, G., & Beauger, C. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9833-7 · Cited by 53
Mahadik, D. B., Lee, Y. K., Park, C.-S., Chung, H.-Y., Hong, M.-H., Jung, H.-N.-R., Han, W., & Park, H.-H. (2015) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2015.10.003 · Cited by 30
Metadata
- Authors
- Müller, V., Rasp, M., Štefanić, G., Ba, J., Günther, S., Rathousky, J., Niederberger, M., & Fattakhova-Rohlfing, D.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-10-16
- Volume
- 21
- Issue
- 21
- Pages
- 5229-5236
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2036821403
- Cited by
- 161
- References
- 1
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly Conducting Nanosized Monodispersed Antimony-Doped Tin Oxide Particles Synthesized via Nonaqueous Sol−Gel Procedure. https://app.cochat.ai/papers/10.1021/cm902189r
- The paper
- Müller, V., Rasp, M., Štefanić, G., Ba, J., Günther, S., Rathousky, J., Niederberger, M., & Fattakhova-Rohlfing, D. (2009). Highly Conducting Nanosized Monodispersed Antimony-Doped Tin Oxide Particles Synthesized via Nonaqueous Sol−Gel Procedure. Chemistry of Materials. https://doi.org/10.1021/cm902189r
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.