The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Palladium Doped Porous Titania Photocatalysts: Impact of Mesoporous Order and Crystallinity
Abstract
Herein, we report a facile synthesis method for highly ordered hexagonal P6m mesoporous palladium doped titania nanoarchitectures using the F127 triblock copolymer as a template. The mesoporous Pd/TiO 2 nanoarchitectures possess high surface areas of 223 m 2 g −1 and large pore volumes of 0.42 cm 3 g −1 at 300 °C that are reduced to 162 m 2 g −1 and 0.29 cm 3 g −1, respectively, as a result of calcination at 450 °C with their tunable mesopore diameter ranging from 5.7 to 8.3 nm. Transmission electron microscopy (TEM) measurements evince that the framework of the highly crystalline mesoporous Pd/TiO 2 is composed of aligned anatase phase grown along the [101] direction. The Pd nanoparticles are well dispersed and exhibit sizes of about 20 nm and they are separated by 1.95 Å, which agrees with the (200) lattice spacing of face-centered cubic Pd. The newly prepared photocatalysts have been compared with Pd photodeposited onto the commercial photocatalyst Sachtleben Hombikat UV-100 by the determination of the rate of HCHO formation generated by the photocatalytic oxidation of CH 3 OH. This study revealed that hexagonal P6m mesoporous Pd/TiO 2 nanoarchitectures possess a 2.5 times higher activity for the photooxidation of CH 3 OH than Pd/Hombikat UV-100. The photocatalytic oxidation of CH 3 OH using either highly ordered hexagonal networks in samples calcined at 350 °C, catalysts with randomly ordered mesoporous channels after calcinations at 450 °C or disordered mesostructures prepared at 550 °C are comparable although the crystallinity of the TiO 2 nanoparticles increases strongly only with calcination temperatures exceeding 500 °C. From the economic point of view, ordered mesochannels prepared upon calcination at 450 °C are considered to be the optimum for saving energy in the photocatalyst preparation without much loss of photocatalytic performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Cited by
Understanding TiO2Photocatalysis: Mechanisms and Materials
Schneider, J., Matsuoka, M., Takeuchi, M., Zhang, J., Horiuchi, Y., Anpo, M., & Bahnemann, D. W. (2014) · Chemical Reviews · doi:10.1021/cr5001892 · Cited by 5,992
Self-citationPhotocatalytic Water Treatment by Titanium Dioxide: Recent Updates
Lazar, M., Varghese, S., & Nair, S. (2012) · Catalysts · doi:10.3390/catal2040572 · Cited by 594
Cobalt-Oxide-Based Materials as Water Oxidation Catalyst: Recent Progress and Challenges
Deng, X., & Tüysüz, H. (2014) · ACS Catalysis · doi:10.1021/cs500713d · Cited by 529
Mesoporous titania photocatalysts: preparation, characterization and reaction mechanisms
Ismail, A. A., & Bahnemann, D. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10407a · Cited by 454
Self-citationA review on catalytic applications of Au/TiO2 nanoparticles in the removal of water pollutant
Ayati, A., Ahmadpour, A., Bamoharram, F. F., Tanhaei, B., Mänttäri, M., & Sillanpää, M. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2014.01.040 · Cited by 327
Khan, H., & Shah, M. U. H. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.111532 · Cited by 267
Metadata
- Authors
- Ismail, A. A., Bahnemann, D. W., Robben, L., Yarovyi, V., & Wark, M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-16
- Volume
- 22
- Issue
- 1
- Pages
- 108-116
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2052888986
- Cited by
- 222
- References
- 2
- FWCI
- 7.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.