The DOI matches its Crossref record.
On the Preferred Orientation and Microstructural Manipulation of Molecular Sieve Films Prepared by Secondary Growth
Abstract
MFI-supported films were prepared using secondary growth of precursor layers. The precursor layers were prepared free of additives and no calcination step was used before secondary growth. Combined microstructural control over film thickness, orientation, continuity, and surface roughness was achieved. Hydrothermal conditions were identified, such as film growth proceeds predominantly by direct growth of the particles of the precursor layer. The prepared polycrystalline films have a columnar microstructure. The out-of-plane grain orientation can be manipulated by secondary growth conditions, and is such that the c -axes of the grains range from perpendicular to the substrate to an angle of ∼34° from the direction normal to the substrate, whereas the in-plane grain orientation is random. Initial film growth rates were sustained at a constant value for extended periods of time with an activation energy of 70 kJ/mol. The degree of out-of-plane orientation increases with film thickness up to a point where changes in concentrations in the secondary growth solution lead to surface roughening and change in the preferred growth direction. Sustained growth preserving film orientation and columnar microstructure is achieved during repeated secondary growth, allowing for control of the film thickness without compromising the deposit orientation and surface smoothness. As a result of their microstructure exhibiting well-intergrown columnar texture with small surface roughness, oriented films with thickness well exceeding the wavelength of visible light are optically transparent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microstructural Optimization of a Zeolite Membrane for Organic Vapor Separation
Lai, Z., Bonilla, G., Diaz, I., Nery, J. G., Sujaoti, K., Amat, M. A., Kokkoli, E., Terasaki, O., Thompson, R. W., Tsapatsis, M., et al. (2003) · Science · doi:10.1126/science.1082169 · Cited by 1,093
Self-citationZeolite membranes – state of their development and perspective
Caro, J., Noack, M., Kölsch, P., & Schäfer, R. (2000) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(99)00295-4 · Cited by 805
Zeolite membranes – Recent developments and progress
Caro, J., & Noack, M. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.03.008 · Cited by 724
Green Routes for Synthesis of Zeolites
Meng, X., & Xiao, F.-S. (2014) · Chemical Reviews · doi:10.1021/cr4001513 · Cited by 635
Zeolite based films, membranes and membrane reactors: Progress and prospects
McLeary, E. E., Jansen, J. C., & Kapteijn, F. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.10.050 · Cited by 460
Metadata
- Authors
- Gouzinis, A., & Tsapatsis, M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-08-13
- Volume
- 10
- Issue
- 9
- Pages
- 2497-2504
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2007374080
- Cited by
- 214
- References
- 0
- FWCI
- 12.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the Preferred Orientation and Microstructural Manipulation of Molecular Sieve Films Prepared by Secondary Growth. https://app.cochat.ai/papers/10.1021/cm9802402
- The paper
- Gouzinis, A., & Tsapatsis, M. (1998). On the Preferred Orientation and Microstructural Manipulation of Molecular Sieve Films Prepared by Secondary Growth. Chemistry of Materials. https://doi.org/10.1021/cm9802402
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.