The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
PdAg Alloy Nanowires: Facile One-Step Synthesis and High Electrocatalytic Activity for Formic Acid Oxidation
Abstract
Bimetallic alloy PdAg nanowires were synthesized by a facile one-step wet chemical strategy. The unique nanostructure with large surface area and active surface (111) planes make them promising electrocatalysts for direct-liquid fuel cells. The electrochemical studies indicated that the PdAg alloy nanowires exhibit enhanced electrocatalytic activity toward formic acid oxidation with larger oxidation current density, higher tolerance to CO poisoning, and more negative onset potential in comparison with the commercial Pd/C catalysts. At the same potentials, the as-synthesized PdAg nanowires show higher long-term stability than Pd/C catalysts in the chronoamperometric analyses. The electron transfer kinetics of HCOOH oxidation on the PdAg nanowires was studied with electrochemical impedance spectroscopy (EIS). It was found that the charge transfer resistance ( R CT ) of formic acid oxidation on PdAg nanowires is much smaller than that obtained from a Pd/C catalyst, which suggests that the electron-transfer kinetics for formic acid oxidation at the synthesized PdAg nanowires is highly facilitated. The present work highlights the facile synthesis of the homogeneous PdAg alloy nanowires and their potential application as anode electrocatalyst of fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Platinum-Based Nanostructured Materials: Synthesis, Properties, and Applications
Chen, A., & Holt-Hindle, P. (2010) · Chemical Reviews · doi:10.1021/cr9003902 · Cited by 1,390
Methanol oxidation and direct methanol fuel cells: a selective review
Wasmus, S., & Küver, A. (1999) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(98)00197-1 · Cited by 1,308
Wanjala, B. N., Luo, J., Loukrakpam, R., Fang, B., Mott, D., Njoki, P. N., Engelhard, M., Naslund, H. R., Wu, J. K., Wang, L., et al. (2010) · Chemistry of Materials · doi:10.1021/cm101109e · Cited by 226
Cited by
Graphene-Supported Nanoelectrocatalysts for Fuel Cells: Synthesis, Properties, and Applications
Liu, M., Zhang, R., & Chen, W. (2014) · Chemical Reviews · doi:10.1021/cr400523y · Cited by 986
Self-citationSynergistic Catalysis over Bimetallic Alloy Nanoparticles
Singh, A. K., & Xu, Q. (2013) · ChemCatChem · doi:10.1002/cctc.201200591 · Cited by 698
Noble-Metal Based Random Alloy and Intermetallic Nanocrystals: Syntheses and Applications
Zhou, M., Li, C., & Fang, J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00436 · Cited by 535
Zhang, L., Chang, Q., Chen, H., & Shao, M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.044 · Cited by 360
2D PdAg Alloy Nanodendrites for Enhanced Ethanol Electroxidation
Huang, W., Kang, X., Xu, C., Zhou, J., Deng, J., Li, Y., & Cheng, S. (2018) · Advanced Materials · doi:10.1002/adma.201706962 · Cited by 323
Metadata
- Authors
- Lu, Y., & Chen, W.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-12-08
- Volume
- 2
- Issue
- 1
- Pages
- 84-90
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2320261967
- Cited by
- 201
- References
- 3
- FWCI
- 4.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.