The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Ketonization of Carboxylic Acids in Biomass Conversion over TiO2 and ZrO2 Surfaces: A DFT Perspective
Abstract
Carboxylic acids play a fundamental role in the transformation of biomass into liquid fuels and other useful chemicals. In order to reduce the O/C content of biofuels, carboxylic acids need to be decomposed by decarboxylation, dehydroxylation, or decarbonylation unimolecular reactions, or they need to be converted into ketones via complex bimolecular reaction mechanisms. Ketonization, that is, the transformation of carboxylic acids into ketones, carbon dioxide, and water, is promoted by heterogeneous catalysts based on oxide materials. Among the most active catalysts are titania and zirconia surfaces. In recent years, a large body of experimental data has been complemented by specific investigations performed with first-principles electronic structure calculations based on density functional theory (DFT). In this review, I discuss the present level of understanding of the bonding modes of carboxylic acids (acetic acid in particular) on the TiO 2 and ZrO 2 surfaces as obtained from DFT calculations. Enolization and ketonization reaction mechanisms determined at the DFT level on TiO 2 and ZrO 2 surfaces are also discussed, and the results are analyzed in view of the experimental evidence. Finally, the role of supported metal particles, of the redox properties of the oxide catalyst, and the nature of the active sites on the surface of titania and zirconia are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Density functional theory with London dispersion corrections
Grimme, S. (2011) · WIREs Computational Molecular Science · doi:10.1002/wcms.30 · Cited by 2,829
Electronic interactions and charge transfers of metal atoms and clusters on oxide surfaces
Pacchioni, G. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43731g · Cited by 272
Self-citation
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Ruiz Puigdollers, A., Schlexer, P., Tosoni, S., & Pacchioni, G. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b01913 · Cited by 925
Self-citationCatalytic fast pyrolysis of biomass over zeolites for high quality bio-oil – A review
Rahman, M. M., Liu, R., & Cai, J. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.08.002 · Cited by 383
Li, H., Riisager, A., Saravanamurugan, S., Pandey, A., Sangwan, R. S., Yang, S., & Luque, R. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b02577 · Cited by 383
Recent Progress in Quantum Chemistry Modeling on the Pyrolysis Mechanisms of Lignocellulosic Biomass
Hu, B., Zhang, B., Xie, W.-L., Jiang, X.-Y., Liu, J., & Lu, Q. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01948 · Cited by 161
Metadata
- Authors
- Pacchioni, G.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-07-29
- Volume
- 4
- Issue
- 9
- Pages
- 2874-2888
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2322407099
- Cited by
- 161
- References
- 4
- FWCI
- 7.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.