The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Composition of Volatile Gases and Thermochemical Properties of Wood for Modeling of Fixed or Fluidized Beds
Abstract
The modeling of the conversion of solid fuel in combustion or gasification systems needs a description of the composition of the volatile gases that leave a fuel particle of typical size in a fixed or fluidized bed during devolatilization. Much work has been published on release of volatiles, but a general model of the composition of volatile gases and a comprehensive presentation of the related thermochemical properties of the fuel are still missing. Here, a simplified model is presented whose structure is valid for any solid fuel. The model consists of a heat and mass balance complemented by empirical data. The empirical coefficients have to be specified for certain classes of fuel: the fuels treated in this paper are one type of hardwood and one of softwood, having particle sizes in the range used in utility boilers. The species in the volatile gases are represented by the time mean mass fractions of CO 2, CO, H 2 O, H 2, light hydrocarbons, and heavy hydrocarbons. In addition, a comprehensive set of data is presented for such properties of wood that are needed for modeling of conversion in fixed and fluidized beds. The data are taken from the literature and from measurements carried out in the present work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermochemical Data of Pure Substances
Barin, I. (1995) · doi:10.1002/9783527619825 · Cited by 4,241
Cited by
Modeling of biomass gasification in fluidized bed
Gómez-Barea, A., & Leckner, B. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.12.002 · Cited by 905
Self-citationTar property, analysis, reforming mechanism and model for biomass gasification—An overview
Li, C., & Suzuki, K. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.01.009 · Cited by 734
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Operating parameters for bio-oil production in biomass pyrolysis: A review
Guedes, R. E., Luna, A. S., & Torres, A. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.019 · Cited by 619
An Overview of Recent Developments in Biomass Pyrolysis Technologies
Uddin, M. N., Techato, K., Taweekun, J., Rahman, M. M., Rasul, M. G., Mahlia, T. M. I., & Ashrafur, S. M. (2018) · Energies · doi:10.3390/en11113115 · Cited by 377
Metadata
- Authors
- Thunman, H., Niklasson, F., Johnsson, F., & Leckner, B.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-10-20
- Volume
- 15
- Issue
- 6
- Pages
- 1488-1497
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2083355193
- Cited by
- 223
- References
- 1
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
