Sensitivity of Asphaltene Properties to Separation Techniques
The DOI matches its Crossref record.
Abstract
Asphaltene properties vary with separation method and sometimes with individual technique. Factors such as contact time, solvent-to-crude oil ratio, and temperature influence asphaltene precipitation and are somewhat standardized. However, the final step in most separations, washing the asphaltene filter cake with solvent, is not standardized. Asphaltene properties can be very sensitive to small amounts of resins and therefore may be sensitive to the amount of washing. Asphaltenes were extracted with three different levels of washing from four source oils (Athabasca, Cold Lake, Lloydminster, and Peace River). In all cases, increased washing decreased asphaltene yield and slightly increased asphaltene density. Increased washing significantly increased molar mass and decreased the solubility of the extracted asphaltenes. A new washing method using a Soxhlet apparatus removed the largest amount of resinous material and yielded asphaltenes with significantly different properties from conventionally washed asphaltenes. Since more resinous material was removed, the Soxhlet method allows a more direct comparison between asphaltenes from different sources. Asphaltenes were also extracted using three standard separation methods, IP 143, ASTM D4124, and a method proposed by Speight. Some property variations between the methods were observed and a set of criteria to obtain consistent samples is proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Water-in-Crude Oil Emulsion Stabilization: Review and Unanswered Questions
Kilpatrick, P. K. (2012) · Energy & Fuels · doi:10.1021/ef3003262 · Cited by 478
Shi, Q., Hou, D., Chung, K. H., Xu, C., Zhao, S., & Zhang, Y. (2010) · Energy & Fuels · doi:10.1021/ef901564e · Cited by 359
Metadata
- Authors
- Alboudwarej, H., Beck, J., Svrcek, W. Y., Yarranton, H. W., & Akbarzadeh, K.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-02-06
- Volume
- 16
- Issue
- 2
- Pages
- 462-469
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2073889573
- Cited by
- 220
- References
- 0
- FWCI
- 10.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.