Global Kinetic Rate Parameters for the Formation of Polycyclic Aromatic Hydrocarbons from the Pyrolyis of Catechol, A Model Compound Representative of Solid Fuel Moieties
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
To obtain kinetic parameters on PAH formation relevant to solid fuels combustion, pyrolysis experiments have been conducted with catechol, a model fuel representing entities in coal and biomass. Catechol pyrolysis experiments were performed in a tubular-flow reactor at temperatures of 500−1000 °C and at a residence time of 0.4 s. PAH products were identified and quantified by high-pressure liquid chromatography with ultraviolet−visible diode-array detection and by gas chromatography with flame ionization and mass spectrometric detection. A pseudo-unimolecular reaction kinetic model was used to model the experimental yield/temperature data of 15 individual aromatics and of combinations of PAH grouped by structural class and ring-number. The modeling of the individual species' yields showed that the pseudo-unimolecular model agreed very well with the experimental data. E a values ranged from 50 to 110 kcal mol - 1, generally increasing as the size of the aromatic product increased from one to five aromatic rings. The pseudo-unimolecular model also performed well in modeling the experimental yields of PAH grouped by structural class and ring number. The global kinetic analysis results for PAH grouped by ring number revealed that E a values increased in the following order: 2-ring < 3-ring < 4-ring < 5-ring < 6-ring. Their yields followed the reverse order: 2-ring > 3-ring > 4-ring > 5-ring > 6-ring. These trends of increasing E a and decreasing yield, as ring number is increased, are consistent with a mechanism for PAH growth involving successive ring buildup reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Global kinetic analysis of complex materials
Burnham, A. K., & Braun, R. L. (1999) · Energy & Fuels · doi:10.1021/ef9800765 · Cited by 585
Cited by
A review of biochar and its use and function in soil
Sohi, S. P., Krull, E., Lopez-Capel, E., & Bol, R. (2010) · Advances in Agronomy · doi:10.1016/s0065-2113(10)05002-9 · Cited by 2,240
(2010) · Joint Research Centre (European Commission) · doi:10.2788/472 · Cited by 851
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
Kawamoto, H. (2017) · Journal of Wood Science · doi:10.1007/s10086-016-1606-z · Cited by 664
“[104] measured Ea values for the formation of PAHs from catechol in the range of 50–110 kcal mol− 1.”
BackgroundOne Step Forward toward Characterization: Some Important Material Properties to Distinguish Biochars
Schimmelpfennig, S., & Glaser, B. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0146 · Cited by 518
Zhang, C., Zeng, G., Huang, D., Lai, C., Chen, M., Cheng, M., Tang, W., Tang, L., Dong, H., Huang, B., et al. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.139 · Cited by 439
Shihadeh, A., & Saleh, R. (2005) · Food and Chemical Toxicology · doi:10.1016/j.fct.2004.12.013 · Cited by 423
Biochar, climate change and soil: a review to guide future research
Sohi, S.-C. (2009) · CSIRO · doi:10.4225/08/58597219a199a · Cited by 420
Modelling of tar formation and evolution for biomass gasification: A review
Font Palma, C. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.082 · Cited by 372
Keiluweit, M., Kleber, M., Sparrow, M. A., Simoneit, B. R. T., & Prahl, F. G. (2012) · Environmental Science & Technology · doi:10.1021/es302125k · Cited by 296
Biochar properties regarding to contaminants content and ecotoxicological assessment
Oleszczuk, P., Jośko, I., & Kuśmierz, M. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.05.044 · Cited by 275
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.012 · Cited by 136
Metadata
- Authors
- Ledesma, E. B., Marsh, N. D., Sandrowitz, A. K., & Wornat, M. J.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-10-15
- Volume
- 16
- Issue
- 6
- Pages
- 1331-1336
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2054070422
- Cited by
- 88
- References
- 1
- FWCI
- 3.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.