The DOI matches its Crossref record.
Effect of Demulsifier Properties on Destabilization of Water-in-Oil Emulsion
Abstract
Demulsification of water-in-bitumen emulsion was studied using 52 nonionic surfactants of different chemical families. Relative solubility number (RSN) and molecular weight were determined for these demulsifiers. Their dewatering performance was evaluated by determining the rate of water separation during gravitational settling and centrifugation. The results indicated that there is no overall correlation between demulsification performance and RSN value. However, within a given surfactant family, such as polymerized polyols, oxyalkylated alkylphenol formadehyde resins, and oxyalkylated alkyl resins, the degree of demulsification was found to correlate with the RSN value. A maximum of dewatering performance was observed in a specific RSN range for two surfactant families. Molecular weight also showed a significant effect on demulsification performance. Surfactants with low molecular weight (<4000) did not break the emulsion in dosages of 300−400 ppm regardless of RSN value. For the water-in-bitumen emulsion studied in this work, the most effective demulsifiers are those with RSN values between 7.5 and 12.5 and molecular weights between 7500 and 15000.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Demulsification techniques of water-in-oil and oil-in-water emulsions in petroleum industry
Zolfaghari, R., Fakhru’l-Razi, A., Abdullah, L. C., Elnashaie, S. S. E. H., & Pendashteh, A. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.06.026 · Cited by 733
Wang, D., Yang, D., Huang, C., Huang, Y., Yang, D., Zhang, H., Liu, Q., Tang, T., Gamal El-Din, M., Kemppi, T., et al. (2021) · Fuel · doi:10.1016/j.fuel.2020.119390 · Cited by 345
Electrostatic phase separation: A review
Mhatre, S., Vivacqua, V., Ghadiri, M., Abdullah, A. M., Al-Marri, M. J., Hassanpour, A., Hewakandamby, B., Azzopardi, B., & Kermani, B. (2015) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2015.02.012 · Cited by 257
Wu, J., Xu, Y., Dabros, T., & Hamza, H. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.09.034 · Cited by 155
Self-citationAl-Sabagh, A. M., El-kafrawy, A. F., Noor El-Din, M. R., El-Tabay, A. M., & Fakher, E. M. (2016) · Indian Chemical Engineer · doi:10.1080/00194506.2014.994677 · Cited by 14
Demulsification of Crude Oil Emulsions Using Some New Water-Soluble Schiff Base Surfactant Blends
Atta, A. M., Abdel-Rahman, A. A.-H., Elsaeed, S. M., AbouElfotouh, S., & Hamad, N. A. (2009) · Journal of Dispersion Science and Technology · doi:10.1080/01932690802548403 · Cited by 6
Metadata
- Authors
- Wu, J., Xu, Y., Dabros, T., & Hamza, H.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-10-15
- Volume
- 17
- Issue
- 6
- Pages
- 1554-1559
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2070318740
- Cited by
- 176
- References
- 0
- FWCI
- 1.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.