The DOI matches its Crossref record.
Carbon Dioxide Capture Using Dry Sodium-Based Sorbents
Abstract
Electrobalance and fixed-bed reactors have been used to study the capture of CO 2 from simulated flue gas using a regenerable Na 2 CO 3 sorbent. CO 2 capture was effective in the temperature range of 60−70 °C, while regeneration occurred in the range of 120−200 °C, depending on the partial pressure of CO 2 in the regeneration gas. Equal molar quantities of CO 2 and H 2 O are produced during sorbent regeneration, and pure CO 2 suitable for use or sequestration is available after condensation of the H 2 O. Capture of as much as 90% of the CO 2 was possible at appropriate reaction conditions, and little or no reduction in either carbonation rate or sorbent capacity was observed in limited multicycle tests. The concept is potentially applicable to the capture of CO 2 from existing fossil fuel-fired power plants, where amine scrubbing is the only CO 2 capture process currently available.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Self-citationCO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Analysis and Status of Post-Combustion Carbon Dioxide Capture Technologies
Bhown, A. S., & Freeman, B. C. (2011) · Environmental Science & Technology · doi:10.1021/es104291d · Cited by 489
Dual-Function Materials for CO2 Capture and Conversion: A Review
Omodolor, I. S., Otor, H. O., Andonegui, J. A., Allen, B. J., & Alba-Rubio, A. C. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02218 · Cited by 355
Sun, H., Wang, J., Zhao, J., Shen, B., Shi, J., Huang, J., & Wu, C. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.040 · Cited by 336
Tailoring Pore Properties of MCM-48 Silica for Selective Adsorption of CO2
Kim, S., Ida, J., Guliants, V. V., & Lin, Y. S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp045634x · Cited by 332
Zhao, M., Minett, A. I., & Harris, A. T. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee22890d · Cited by 285
Solid‐waste‐Derived carbon dioxide‐capturing materials
Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60
Bommersbach, P., Chaker, M., Mohamedi, M., & Guay, D. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp801143a · Cited by 38
Metadata
- Authors
- Liang, Y., Harrison, D. P., Gupta, R. P., Green, D. A., & McMichael, W. J.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-17
- Volume
- 18
- Issue
- 2
- Pages
- 569-575
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2031182320
- Cited by
- 212
- References
- 0
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
