The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Dynamic Asphaltene−Resin Exchange at the Oil/Water Interface: Time-Dependent W/O Emulsion Stability for Asphaltene/Resin Model Oils
Abstract
The critical electric field (CEF) technique was used to determine the time-dependent stability of water-in-oil emulsions in which asphaltenes stabilize the film. Stabilizing films comprising purely asphaltenes were observed to increase monotonically in stability with time. However, in the presence of resins, particularly in mass ratios of resins to asphaltenes of 0.5−1.0, the stability of the emulsions as probed by CEF were observed to exhibit a very sharp local maximum. Similar behavior was observed in dilatational interfacial rheology experiments using an oscillating drop tensiometer. The dilatational modulus (ε) for the stabilizing film, as obtained from the variation of interfacial tension with interfacial area, of an aging asphaltene/resin model oil droplet in water exhibited a time-dependent local maximum. Values of ε were nominally lower for asphaltene/resin model oil systems than asphaltene model oil systems, qualitatively similar to CEF trends. These observed phenomena are similar to the “Vroman effect”, observed in competitive protein adsorption. One plausible explanation is that resin-solvated asphaltenic aggregates are able to diffuse and adsorb to the interface more quickly than larger pure asphaltenic aggregates, but then a molecular rearrangement occurs in which resins become the primary adsorbent in the monolayer by reptation through the consolidated asphaltene network, displacing the asphaltenes and reducing the stability and the dilatational elasticity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of Asphaltene Solvency on Stability of Water-in-Crude-Oil Emulsions
McLean, J. D., & Kilpatrick, P. K. (1997) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1997.4807 · Cited by 599
Self-citation
Cited by
Interfacial sciences in unconventional petroleum production: from fundamentals to applications
He, L., Lin, F., Li, X., Sui, H., & Xu, Z. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00102a · Cited by 350
Wang, D., Yang, D., Huang, C., Huang, Y., Yang, D., Zhang, H., Liu, Q., Tang, T., Gamal El-Din, M., Kemppi, T., et al. (2021) · Fuel · doi:10.1016/j.fuel.2020.119390 · Cited by 345
Interfacial behavior of asphaltenes
Langevin, D., & Argillier, J.-F. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.10.005 · Cited by 259
Perino, A., Noïk, C., & Dalmazzone, C. (2013) · Energy & Fuels · doi:10.1021/ef301627e · Cited by 36
Metadata
- Authors
- Yang, X., Verruto, V. J., & Kilpatrick, P. K.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-01-26
- Volume
- 21
- Issue
- 3
- Pages
- 1343-1349
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2009026934
- Cited by
- 163
- References
- 1
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.