The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
The Role of Additives for Diesel and Diesel Blended (Ethanol or Biodiesel) Fuels: A Review
Abstract
Around the world, there is a growing increase in biofuels consumption, mainly ethanol and biodiesel as well as their blends with diesel that reduce the cost impact of biofuels while retaining some of the advantages of the biofuels. This increase is due to several factors like decreasing the dependence on imported petroleum; providing a market for the excess production of vegetable oils and animal fats; using renewable and biodegradable fuels; reducing global warming due to its closed carbon cycle by CO 2 recycling; increasing lubricity; and reducing substantially the exhaust emissions of carbon monoxide, unburned hydrocarbons, and particulate emissions from diesel engines. However, there are major drawbacks in the use of biofuel blends as NOx tends to be higher, the intervals of motor parts replacement such as fuel filters are reduced and degradation by chronic exposure of varnish deposits in fuel tanks and fuel lines, paint, concrete, and paving occurs as some materials are incompatible. Here, fuel additives become indispensable tools not only to decrease these drawbacks but also to produce specified products that meet international and regional standards like EN 14214, ASTM D 6751, and DIN EN 14214, allowing the fuels trade to take place. Additives improve ignition and combustion efficiency, stabilize fuel mixtures, protect the motor from abrasion and wax deposition, and reduce pollutant emissions, among other features. Two basic trends are becoming more relevant: the progressive reduction of sulfur content and the increased use of biofuels. Several additives' compositions may be used as long as they keep the basic chemical functions that are active.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters
Knothe, G. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2004.11.002 · Cited by 2,329
Ethanol?diesel fuel blends ?? a review
HANSEN, A. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.04.007 · Cited by 1,002
Preparation and characterization of bio-diesels from various bio-oils
Lang, X. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(01)00051-7 · Cited by 713
McCormick, R. L., Graboski, M. S., Alleman, T. L., Herring, A. M., & Tyson, K. S. (2001) · Environmental Science & Technology · doi:10.1021/es001636t · Cited by 633
Cetane numbers of branched and straight-chain fatty esters determined in an ignition quality tester☆
Knothe, G., Matheaus, A. C., & Ryan, T. W. (2003) · Fuel · doi:10.1016/s0016-2361(02)00382-4 · Cited by 572
Lubricity of Components of Biodiesel and Petrodiesel. The Origin of Biodiesel Lubricity
Knothe, G., & Steidley, K. R. (2005) · Energy & Fuels · doi:10.1021/ef049684c · Cited by 426
Biodiesel from palmoil—an analysis of its properties and potential
Kalam, M. A., & Masjuki, H. H. (2002) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00085-5 · Cited by 404
Interest of combining an additive with diesel–ethanol blends for use in diesel engines
de, P. S. (2001) · Fuel · doi:10.1016/s0016-2361(00)00117-4 · Cited by 376
Performance of jatropha oil blends in a diesel engine
Forson, F. K., Oduro, E. K., & Hammond-Donkoh, E. (2004) · Renewable Energy · doi:10.1016/j.renene.2003.11.002 · Cited by 354
The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation
Jung, H., Kittelson, D. B., & Zachariah, M. R. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2004.11.015 · Cited by 300
The influence of antioxidants on the oxidation stability of biodiesel
Mittelbach, M., & Schober, S. (2003) · Journal of the American Oil Chemists' Society · doi:10.1007/s11746-003-0778-x · Cited by 249
Modifying soybean oil for enhanced performance in biodiesel blends
Kinney, A. J., & Clemente, T. E. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2004.11.008 · Cited by 214
The impact of antioxidants on biodiesel oxidation stability
Schober, S., & Mittelbach, M. (2004) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.200400954 · Cited by 203
Improvement of Diesel fuel properties by using additives
Gürü, M., Karakaya, U., Altıparmak, D., & Alıcılar, A. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00094-2 · Cited by 201
Hydroprocessed vegetable oils for diesel fuel improvement
Stumborg, M., Wong, A., & Hogan, E. (1996) · Bioresource Technology · doi:10.1016/0960-8524(95)00181-6 · Cited by 198
The Effects of Diesel-Ethanol Blends on Diesel Engine Performance
Bi̇lgi̇n, A., Durgun, O., & Şahin, Z. (2002) · Energy Sources · doi:10.1080/00908310252889933 · Cited by 122
Effect of diesel soot contaminated oil on engine wear — investigation of novel oil formulations
Gautam, M., Chitoor, K., Durbha, M., et al. (1999) · Tribology International · doi:10.1016/s0301-679x(99)00081-x · Cited by 109
Ulrich, A., & Wichser, A. (2003) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-003-2054-3 · Cited by 63
Influence of aceto acetic esters and di-carboxylic acid esters on diesel fuel lubricity
Anastopoulos, G., Lois, E., Zannikos, F., Kalligeros, S. S., & Teas, C. (2001) · Tribology International · doi:10.1016/s0301-679x(01)00067-6 · Cited by 56
HFRR Studies on Methyl Esters of Nonedible Vegetable Oils
Bhatnagar, A. K., Kaul, S., Chhibber, V. K., & Gupta, A. (2006) · Energy & Fuels · doi:10.1021/ef0503818 · Cited by 53
Multifunctional Diesel Fuel Additives from Triglycerides
Suppes, G. J., Goff, M., Burkhart, M. L., Bockwinkel, K., Mason, M. H., Botts, J. B., & Heppert, J. A. (2000) · Energy & Fuels · doi:10.1021/ef000122c · Cited by 50
Physical properties of oleochemical carbonates
Kenar, J. A., Knothe, G., Dunn, R. O., Ryan, T. W., & Matheaus, A. (2005) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-005-5173-5 · Cited by 44
BIODIESEL BLEND DETECTION WITH A FUEL COMPOSITION SENSOR
Tat, M. E., & Gerpen, J. H. V. (2003) · Applied Engineering in Agriculture · doi:10.13031/2013.13100 · Cited by 40
Fuel Additives: Evolution and Use in 1996-2000
Данилов, А. М. (2001) · Chemistry and Technology of Fuels and Oils · doi:10.1023/a:1014231230570 · Cited by 23
de Andrade, J. B., & Miguel, A. H. (1985) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067318508078384 · Cited by 19
Cited by
Conversion of biomass platform molecules into fuel additives and liquid hydrocarbon fuels
Climent, M. J., Corma, A., & Iborra, S. (2014) · Green Chemistry · doi:10.1039/c3gc41492b · Cited by 1,383
Biodiesel production, properties, and feedstocks
Moser, B. R. (2009) · In Vitro Cellular & Developmental Biology - Plant · doi:10.1007/s11627-009-9204-z · Cited by 787
Lee, R. A., & Lavoie, J.-M. (2013) · Animal Frontiers · doi:10.2527/af.2013-0010 · Cited by 571
Soudagar, M. E. M., Nik-Ghazali, N.-N., Abul Kalam, M., Badruddin, I. A., Banapurmath, N. R., & Akram, N. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.019 · Cited by 528
Rahmat, N., Abdullah, A. Z., & Mohamed, A. R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.010 · Cited by 458
Metadata
- Authors
- Ribeiro, N. M., Pinto, A. C., Quintella, C. M., da Rocha, G. O., Teixeira, L. S. G., Guarieiro, L. L. N., do Carmo Rangel, M., Veloso, M. C. C., Rezende, M. J. C., Serpa da Cruz, R., de Oliveira, A. M., Torres, E. A., & de Andrade, J. B.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-25
- Volume
- 21
- Issue
- 4
- Pages
- 2433-2445
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2081488360
- Cited by
- 514
- References
- 26
- FWCI
- 10.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.