The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Laminar Burning Velocities of 2,5-Dimethylfuran Compared with Ethanol and Gasoline
Open accessAbstract
The 2,5-dimethylfuran (DMF) has attracted renewed global interest since its improved production methods were published in Nature and Science in 2007. Its high energy density makes it a promising biofuel and a possible alternative to gasoline. Consequently, a series of studies, led by the University of Birmingham, aims to assess the potential of DMF as an automotive energy carrier. These studies will include an analysis of the spray properties, the laminar flame characteristics, the engine performance, and the subsequent emissions. This paper examines the laminar flame characteristics from a quiescent homogeneous air−fuel mixture. The experiments were conducted using a constant volume vessel and were recorded by high speed schlieren visualization. By measurement of the flame growth following ignition, the laminar flame speed was determined. The calculation of flame stretch yielded the Markstein lengths and the laminar burning velocities. This paper presents the results of DMF combustion for a range of equivalence ratios (0.6−2.0) and initial temperatures (50−100 °C). The flame performance when using DMF is compared to EN228 gasoline and to the most commonly used biofuel substitute for gasoline, ethanol. The data shows that ethanol has the highest laminar burning velocity, followed by gasoline, and then DMF. In the 0.9−1.1 equivalence ratio range, the laminar burning velocity of DMF was very similar to gasoline and the difference was within 10%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Chlorides in Ionic Liquid Solvents Convert Sugars to 5-Hydroxymethylfurfural
Zhao, H., Holladay, J. E., Brown, H., & Zhang, Z. C. (2007) · Science · doi:10.1126/science.1141199 · Cited by 1,997
Cited by
Electrocatalytic Conversion of Furanic Compounds
Kwon, Y., Schouten, K. J. P., van der Waal, J. C., de Jong, E., & Koper, M. T. M. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01861 · Cited by 326
Wang, C., Xu, H., Daniel, R., Ghafourian, A., Herreros, J. M., Shuai, S., & Ma, X. (2013) · Fuel · doi:10.1016/j.fuel.2012.05.043 · Cited by 307
Self-citationCombustion performance of bio-ethanol at various blend ratios in a gasoline direct injection engine
Turner, D., Xu, H., Cracknell, R. F., Natarajan, V., & Chen, X. (2011) · Fuel · doi:10.1016/j.fuel.2010.12.025 · Cited by 302
Self-citationNilges, P., & Schröder, U. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41857j · Cited by 295
Biofuel production from biomass
Sindhu, R., Binod, P., Pandey, A., Ankaram, S., Duan, Y., & Awasthi, M. K. (2019) · Current Developments in Biotechnology and Bioengineering · doi:10.1016/b978-0-444-64083-3.00005-1 · Cited by 135
Metadata
- Authors
- Tian, G., Daniel, R., Li, H., Xu, H., Shuai, S., & Richards, P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-06-15
- Volume
- 24
- Issue
- 7
- Pages
- 3898-3905
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2086083662
- Cited by
- 188
- References
- 1
- FWCI
- 16.55
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.